Administrator Guide
Table Of Contents
- Dell Wyse ThinLinux 1.0.3 INI Guide
- Introduction
- Getting Started: Learning INI File Basics
- General Settings Parameter Options
- Peripheral Settings Parameter Options
- Connection Settings Parameter Options
- Custom GNOME Settings Parameter Options
- Connect Parameter Options
- Printer Parameters Option
- TimeZone Parameter: Values
- Keyboard.layouts Parameter: Values
Parameter Description
ICADynamicDriveMapping={yes, no} For ICA only.
To enable or disable mapping of a single device based on the device
name
Default value is no.
ICADynamicFolderMapping={yes, no} For ICA only.
To enable or disable mapping of all the devices listed in the standard
mount point. For example, /run/media. Hence it allows the user to
enable or disable PAM login.
Default value is no.
ICADynamicMapping={yes, no} For ICA only.
To enable or disable le system mapping for ICA session.
Default value is yes.
ICAFullscreen={yes, no} For ICA only.
Default is no.
Enables to run the session at full screen not in a window.
ICAhotkey={yes, no}[<hotkey name>=<supported
value>]
For ICA only.
Default is yes.
Yes/no option to enable and allow mapping of the hotkeys.
For example:
ICAhotkey=yes
Hotkey1Char=F1 Hotkey1Shift=Shift
Hotkey2Char=F3
Hotkey2Shift=Shift Hotkey3Char=F2
Hotkey2Shift=Shift Hotkey3Char=F2
Hotkey11Char=plus Hotkey11Shift=Ctrl
NOTE: All hotkey options must be on one line.
ICAMMAudio={yes, no} For ICA only.
ICAMMAudio is used to enable Citrix HDX Multimedia audio. This
parameter requires two thin client reboots. If this parameter is set, then
audio will be played by using client encoding and decoding capabilities.
ICAMMVideo={yes, no} For ICA only.
Default is yes.
ICAMultiMedia option is used to enable Citrix HDX Multimedia video.
25