Administrator Guide
Table Of Contents
- Dell Wyse ThinLinux 1.0.3 INI Guide
- Introduction
- Getting Started: Learning INI File Basics
- General Settings Parameter Options
- Peripheral Settings Parameter Options
- Connection Settings Parameter Options
- Custom GNOME Settings Parameter Options
- Connect Parameter Options
- Printer Parameters Option
- TimeZone Parameter: Values
- Keyboard.layouts Parameter: Values
Parameter Description
This parameter requires two thin client reboots. If this parameter is
set ,then video is extracted by using the client rendering
capabilities(encoding and decoding).
ICAMultistream={True, False}
To enable multiple streams to be used when connecting to a
multistream ICA enabled server, you must ensure this parameter is set
to True.
Default is False
ICAProxyHost=< IP address> For ICA only.
Species the rewall server address for the ICA connection. When
conguring an alternate address for rewalls and HTTP, SOCKS is used
for ICAProxyType, you must provide the proxy server IP address and
port. Each entry with optional port is specied as host:port, where :port
is optional. If not specied, port depends on the browsing protocol.
ICAProxyType={ None, HTTP, SOCKS} For ICA only.
It denes the proxy type for the ICA connection. When conguring an
alternate address for rewalls, you can select the proxy type of None,
HTTP, or SOCKS.
ICAResolution={ default, seamless, 640x480, 800x600,
1024x768, 1280x1024, 1600x1200}
For ICA only.
Default is default.
Species the connection display resolution. The default value starts the
connection using the current desktop display setting. If the connection
is to a published application, the seamless selection is available.
Seamless option applicable only for Published Application and
Storefront connections. Default option will start the connection using
the current desktop display setting.
ICAStoreName=< Store name specied in the xenapp or
xendesktop server>
For ICA only.
Species the Global ICA Store name which is used for PNAgent Login.
IniFileSource={ cache, local, server, none} Default is cache.
Species the source of the INI le to use:
• Selecting the local species that the local is the ini le created from
settings made on the client GUI.
• cache is the cached/saved/used-at least-once ini le originally from
a le server. For example, a GUI initially set up by an administrator.
NOTE: If a le server is available, the cache valueallow the
client to rst look to a le server for the latest ini available
on the server to use. However, if a le server is not found,
for example, the le server is down, the client uses the
cached/saved/used-at least-once ini le.
• Selecting the server species that the server is the ini le only from
the le server such as an FTP server. The server value will not allow
the client to use a cached ini le.
MouseSendsControlV={yes, no} For ICA only.
Default is no.
26