Administrator Guide

Parameter Description
MouseSendsControlV allows you to control the mouse button action in
a Unix environment.
The following are the values:
yes: In a Unix environment, a middle mouse performs the same paste
function as the Ctrl+V keystroke combination in the Windows.
no: Disables the middle button paste, when used in the wlx.ini le with
ICA v.10.
NETWORK.ETH0.MTU={ Any positive integer} Default is System assigned automatically Species the network card’s
maximum transmission unit size.
PAMLoginEnabled={yes, no} For ICA only.
PAMLoginEnabled option allows the user to set /reset the domain value
and allows the user to enable or disable PAM login.
Default value is no.
PNAgentServer=<host address or URL>[:<port>][;<host
address or URL> [:<port>]]
Species a list of PNAgent servers or complete URL. If not specied,
port depends on the browsing protocol. If multiple servers are
mentioned, they should be separated by ;.
RapportSecurePort=<443> Default is 443
The secure port number of the WDM service.
RapportServer=< WDMServer-IP or FQDN> Default is none Only IPV4 is supported.
Seamless={yes, no} For ICA only.
Default is no.
Seamless option is used to set the default resolution for ICA-published
applications to seamless. This parameter is recommended to use for
launching applications, not recommended for launching desktop
connections.
TimeoutDelayLoginForNetwork=<integer from 1 to30> Sets the delay (wait) time before performing the authentication due to
network delay.
UDPAudioPortHigh={yes, no} For ICA only.
Default is 16509.
This parameter is used to congure UDP port range for real time audio
data packet exchange.
UDPAudioPortLow={yes, no} For ICA only.
Default is 16500.
This parameter is used to congure UDP port range for real time audio
data packet exchange.
UseLastDomainName={true, false} Default is False
27