Administrator Guide

Options Description
Resolution={ default, seamless, 640x480, 800x600, 1024x768,
1280x1024, 1600x1200}
Default is default, which starts the connection using the
current desktop display setting.
Species the connection display resolution. The default value
starts the connection using the current desktop display setting.
Seamless option is applicable only for Published Application and
Storefront connections.
SmartCard={ Yes,no} Default is no.
When set to yes, this option enables logging into the Citrix
Server with a Smart Card PIN. This parameter is not applicable
for PA connections.
SmartCardType={ GEMALTODOTNET, CAC} Species the type of the smart card you are using to make the
connection to the Storefront Server.
To enable smart card login, set parameter SmartCard=yes and
parameter smartcardtype to type of smart card.
NOTE: It is applicable only for storefront server.
PIV values needs to be added.
StoreFront={yes, no} The option to have the connection attempt to connect to the
Storefront server. There is no default value. If set to no, the
connection attempts to connect to the PNAgent server.
StoreName=< Name of the Store> It species the name of the Store through which the connection
for Storefront server is established.
Username={<username>, $SN, $MAC, $IP, $DN, $UN, $PW,
$TN}
Species the name required to log in to the application server.
Either a conventional login name or a variable can be used.
Variable and Description:
username — Conventional login name
$SN — Serial number
$MAC — MAC address
$IP — IP Address
$DN — Sign-on domain name
$UN — Sign-on name
$PW — Sign-on password
$TN — Terminal name
RDP Connect Options
The following table contains the supported options you can use for RDP connections where default values are in bold:
Example:
CONNECT=RDP \
41