Administrator Guide

Options Description
RDPassword=<RD Password> Species the RD Password to use for the RD Gateway login.
This parameter should be base-64 encrypted.
RdpClipboard={yes,no} Default is yes
RdpClipboard option is used to enable the clipboard in an RDP
session.
RDServer=<RDServer address> Species the RD Gateway host address
RDUsername=<RD UserName> Species the RD Username to use for RD Gateway Login
Reconnect={no, yes} Default is no
Reconnect option is used to automatically reconnect to an
application server after a disconnection.
ReconnectSeconds=<1 to 3600> Default is 30
Species the amount of time in seconds (default is 30) to wait
before automatic reconnection to an application server after a
disconnection. Requires Reconnect=yes or 1.
Resolution= {default, 640x480, 800x600, 1024x768, 1280x1024,
1600x1200}
Default value is default, which starts the connection using the
current desktop display setting.
Species the connection display resolution. The default value
starts the connection using the current desktop display setting.
SameLoginForRD={yes,no} Default is yes.
SameLoginForRD option is used to enable Smart Card
Authentication.
SocketRecvTimeout=<timeout in seconds> If the RDP client is unable to connect to the server in 120
seconds, the connection times out. Using this parameter you
can specify a custom value other than 120 seconds.
Sound= {o, local, remote} Default is local.
You can enable or disable the sound eect using the Sound
parameter.
o - disable sound
local - enable sound to local machine (default)
remote - enable sound to remote machine
UseRDGateway={yes,no} Default is no.
UseRDGateway option is used to enable RD gateway.
Username={<username>, $SN, $MAC, $IP, $DN, $UN, $PW,
$TN}
Default is none.
Species the name required to log in to the RDP server.
45