Administrator Guide
Table Of Contents
- Dell Wyse ThinLinux 1.0.3 INI Guide
- Introduction
- Getting Started: Learning INI File Basics
- General Settings Parameter Options
- Peripheral Settings Parameter Options
- Connection Settings Parameter Options
- Custom GNOME Settings Parameter Options
- Connect Parameter Options
- Printer Parameters Option
- TimeZone Parameter: Values
- Keyboard.layouts Parameter: Values
Option Description
Specify this parameter if you are forwarding the printer access
to a Citirx or RDESKTOP connection.
SMBPrinter
The following table contains the supported options you can use for the SMBPrinter parameter where default values are in bold:
Table 18. SMBPrinter Parameter Options
Option Description
Default={yes ,no} Default is yes
Description=<string> Not used internally.
domain= string<domain> It provides domain to SAMBA server.
Enable={yes, no} Default is yes
ModelID=<linux driver name> It identies the printer for the purpose of choosing a Linux
printer driver.
For example, Dell B5465dnf Laser MFP.
Name=<printer name> It provides both the name that is given in the local printers list
and the internal name of the local print queue. The name must
be between 1 and 16 characters, starting with a letter and
composed entirely of letters, digits, underscores, and dashes.
NOTE: This parameter is mandatory
Password=<base64-encoded password> It provides the password to SAMBA server.
PPD=<PPD name> It directly species a Postscript Printer Denition lename for
use, as a local printer driver.
PrinterID=<Windows driver> It identies the printer for the purpose of choosing a Windows
printer driver.
For example, Brother MFC-420CN Printer.
Specify this parameter if you are forwarding the printer access
to a Citirx or RDESKTOP connection.
Username=<username> It provides the username to SAMBA server.
60