Administrator Guide

3
General Settings Parameter Options
The following table contains parameters used for conguring the general settings where default values are in bold.
Table 2. General Settings Parameter Options.
Parameter Description
ActiveDirectoryServer= <string> Active Directory Server IP used for Domain Login to the
clientDomain Login of the client.
For example, ActiveDirectoryServer=10.150.244.105
AddtoEtcHosts= "ip1 FQDN1 aliases1; ip2 FQDN2 aliases2; ..." Default is none
Adds entries to the /etc/hosts le where aliases are an optional
space-separated list of host names.
AudioMute= {Yes, no} Default is no
Mutes the volume
AudioPlayback= hdmi If AudioPlayback is set to hdmi, HDMI sound device will have
higher priority compared to other internal analog device.
AudioVolume=<0 – 100> Determines the volume level.
AutoLogin={yes, no} Default is yes
To disable or enable thinuser auto-login.
AutoPower={Yes, No} Default is no
Species how the system behaves when rst power is applied to
the system after power is switched o. If set to Yes, system will
get the power by itself up as soon as power is switched. If set to
No, user will have to press the thin client’s power button to
initiate system power.
Browser.ClearBrowserData={yes, no} Browser.ClearBrowserData option clears out or persists the
browser history across dierent client users.
yes - Clears out the browser data across dierent user log-ins.
no - Persists the browser data across dierent user log-ins.
Browser.Homepage=<URL> If the browser add-on is installed, this is the URL to the home
page for the browser.
Browser.SecModules=<string> For ICA only
This parameter is used to support smart card authentication
through the browser.
9