Administrator Guide

select the swap dual screens check box, you are able to set Main Screen to Screen2, but still have it at the left side or the
top side, which is considered more user friendly.
Changing Display Settings Dynamically
From ThinOS 8.4 release, after you change the display settings, the changes will take eect immediately without a system restart.
Single mode user scenario
Go to System Setup → Display → General, and do the following:
1. Change resolution from DDC table or User dened display settings.
2. Change rotation setting from User dened display settings.
When the display settings are changed, the modied settings are applied to the active sessions dynamically. But some of the active
sessions disconnect and then reconnect. For example, RDP for Win7 session.
Dual Head user scenario
Go to System Setup → Display → Dual Head and change the settings.
Go to System Setup → Display → General, and do the following:
1. Change resolution from DDC table or User dened display settings.
2. Change rotation setting from User dened display settings.
When the display settings are changed during active sessions, the active sessions do not resize dynamically in the following
situations:
• Seamless sessions
• For dual head mode, including:
– Change from single mode to dual head.
– Change from dual head to single mode.
– Change display setting in dual head mode.
To apply the settings, disconnect the session and reconnect it.
Conguring the peripherals settings
The Peripherals dialog box enables you to congure the settings for the Keyboard, Mouse, Audio, Serial, Camera, Touch Screen, and
Bluetooth.
• Conguring the keyboard settings
• Conguring the mouse settings
• Conguring the audio settings
• Conguring the serial settings
• Conguring the camera settings
• Conguring the touch screen settings
• Conguring the bluetooth settings
Conguring the keyboard settings
To congure the keyboard settings:
1. From the desktop menu, click System Setup, and then click Peripherals.
121