Administrator Guide

Limitations of Citrix icon refresh
Following are the limitations of Citrix icon refresh:
Citrix icon refresh is supported in classic mode and storefront mode only.
Virtual Desktop Infrastructure (VDI) mode is not supported.
Using multiple audio in Citrix session
ThinOS supports multiple audio device utilizations in the XenDesktop or XenApp version 7.6 and later. You can connect or disconnect
the audio devices anytime during the session, but the behavior is similar to a local desktop. With multiple device support, you can
connect multiple audio devices and select a specic device for a specic application.
The Audio Plug N Play policy must be enabled on the Citrix Remote Desktop Session (RDS) desktop. The Audio Plug N Play policy
setting allows or prevents the use of multiple audio devices to record and play sound. This setting is enabled by default.
NOTE: On the Citrix Virtual Desktop Infrastructure (VDI) desktop, pre-conguration is not required.
Supported devices—USB headset, webcam (without USB redirection), and analog headset devices are supported.
The following are valid working conditions for multiple audio:
Using Citrix HDX generic audio
a. Select the audio device as PC Mic and Speaker.
b. Congure the speaker or microphone.
c. For secondary ringer, select the audio devices excluding the devices that are already selected.
Using Citrix RealTime Multimedia Engine (RTME)
a. Select the audio device as HID headset with PC Mic and Speaker.
b. Set PC Mic and Speaker to congure the speaker or microphone.
c. For secondary ringer, select the audio devices excluding the devices that are already selected.
The following scenarios must be considered during multiple audio settings:
ThinOS default audio is set to the latest plug-in audio device.
Session default audio is set to the ThinOS default audio. However, this option can be changed.
Restart Skype for Business/Lync client after you plug in and remove the device.
ICA RTP audio is supported with multiple audio connections.
During a call, the audio device settings can be switched without plugging in or plugging out the device.
Multiple audio can be shared across sessions.
Limitations
Wyse 3010 thin client with ThinOS and Wyse 3020 thin client with ThinOS are not supported.
In Wyse 3030 LT thin client with ThinOS, set the DP audio as the default audio device to use DP audio in a session. Else, the DP
audio will not available in the session.
Citrix multiple audio feature does not work with HDX generic audio. The resolution for the issue will be delivered in the next
ThinOS release.
Using Citrix NetScaler with CensorNet MFA authentication
SMS PASSCODE is re-branded as CensorNet MFA. You can congure NetScaler Gateway to use a One Time Passcode/Password
(OTP) in the form of a personal identication number (PIN) or passcode. To obtain this one-time password, you must install
CensorNet app on your mobile. After you enter the passcode or PIN, the authentication server invalidates the one-time password.
You cannot enter the same PIN or password again. For more information about conguring one-time passcode, see the Citrix
documentation.
70