Release Notes

• Resolution—From the Resolution drop-down list, select a display resolution supported by your monitor.
In Mirror Mode, the resolution list is derived from the intersection of resolutions in all connected monitors.
In Span Mode, select a monitor block and change its resolution from the Resolution drop-down list.
• Rotation—From the Rotation drop-down list, select an option to rotate the monitor screen in dierent directions—Left turn 90
degrees or Right turn 90 degrees. By default, the option is set to None.
3 Click Apply.
The new display settings are applied, and you can see the modied display.
4 Click OK to conrm the new settings.
NOTE: Use the Identify option, to know the display order number of the connected monitors.
For the list of known issues about the display setup, see Known issues.
NOTE: You can congure the multi-display setup manually. If you want to set automatic congurations for multi-display setup
using INI, use the Dual head parameters. You can dene the behavior of the rst two monitors using INI parameters, and the
remaining monitors follow the settings congured for the rst two monitors.
Hardware capability
This section describes the hardware capability for display.
Table 18. Port preferences
Platform Port preferences
Wyse 5070 thin client with Celeron
processor
• On Wyse 5070 thin client without wireless module, the optional port can be used as second
RJ-45, SFP, VGA, or second serial port.
• On Wyse 5070 thin client with wireless module, the optional port cannot be used as second
RJ-45 or SFP.
• When monitor is connected on USB Type-C port, DisplayPort 2 becomes inactive.
Wyse 5070 thin client with Pentium
processor
• On Wyse 5070 thin client without wireless module, the optional port can be used as second
RJ-45, SFP, VGA, or second serial port.
• On Wyse 5070 thin client with wireless module, the optional port cannot be used as second
RJ-45 or SFP.
• Back headset is disabled if front headphone is used.
• When monitor is connected on USB Type-C port, DisplayPort 2 becomes inactive.
• When VGA monitor is connected on VGA optional port, DisplayPort 3 becomes inactive.
Wyse 5070 Extended thin client
• On Wyse 5070 Extended thin client without wireless module, the optional port can be used
as second RJ-45, SFP, or VGA.
• On Wyse 5070 Extended thin client with wireless module, the optional port cannot be used
as second RJ-45 or SFP.
• Back headset is disabled if front headphone is used.
• When monitor is connected on USB Type-C port, DisplayPort 2 becomes inactive.
• When VGA monitor is connected on VGA optional port, DisplayPort 3 becomes inactive.
• Power option is available on the rst serial port.
• PCle slot is available.
Wyse 5070 thin client with Pentium processor
30
ThinOS 8.5_107