Release Notes

INI parameters Description
plan-text) are used to specify the SCEP administrator's credential, and ScepAdminUrl must
be set correctly to specify the corresponding SCEP admin web page's URL. If EnrollPwd or
EnrollPwdEnc is set, client tries to use these set of settings to automatically get an
enrollment password and then use that password to request a certicate. If communication
security is necessary in your environment during this phase, add https:// as the prex for
ScepAdminUrl to use HTTPS instead of the default HTTP protocol.
Use ScepAutoEnroll=no AutoRenew=yes to only enable SCEP auto renew; all other
parameters are not needed if ScepAutoEnroll is set to no.
SessionCong=RDP
*[GracefulReconnTimeout={10 - 100}]
You can set SessionCong=RDP to establish the default setting for RDP sessions.
The option enables you to set a timeout for RDP to reconnect the session. If there is no
response from the server during this time period, it avoids the RDP session to stop
responding for a long time and cannot auto-reconnect due to poor network connection or
short time network disconnection. There is no default value for this option; the feature is
disabled if it is not set. The valid value is 10 to 100, in seconds.
SessionCong=PCoIP
*[DisableRTAV=[yes, no]]
SessionCong— Species the PCoIP default settings of the optional connection
parameters for all PCoIP sessions.
The option DisableRTAV can disable the RTAV virtual channel in a session for RTAV virtual
channel which may impact the performance of some audio or video related applications.
The default value is no.
PnliteServer=List of {IP address, DNS
names or URLs}
*[IgnoreDefaultGateway=[yes, no]]
A list of host names or IP addresses with optional TCP port number or URLs of PN-Lite
servers. The default value is empty. Each entry with an optional port is specied in the
format Name-or-IP:port, where :port is optional. If port number is not specied,
port number 80 is used. When you specify a port number, it is saved in the non-volatile
memory.
The IgnoreDefaultGateway option ignores the default gateway of the current selected
store during Netscaler login. You must always use pnliteserver to continue. The value yes is
used to ignore. The default value is no that uses default gateway as the Netscaler server to
reset login again.
IEEE8021X=[yes, no]
*[network={wired, wireless}]
*[wiredreset=[yes, no]]
If IEEE8021X is set to no, then all other parameters following the parent parameter are
ignored. Also, network is not congured, and the conguration is ignored.
The option wiredreset is used to reset the MII when authenticate cancel occurs. This
option is only for wired network, and it is disabled by default.
SessionCong=ICA
*[DisableMMRSeek =[yes, no]]
You can set ICA to establish the default settings for ICA sessions.
The DisableMMRSeek option can be used to disable the MMR seek capability on the client
side. The default value is no. It might cause trap while enabling this setting with some
specic servers, for example, Windows 10 IoT Enterprise.
AdminMode=[yes, no]
*[ShowAESButton=[yes, no]]
AdminMode—Default is no. Yes/no option to use the username and the password to
obtain a high thin client conguration when the privilege parameter level is set to high
(Privilege=high).
If ShowAESButton=yes is specied, and you enter into the admin mode, the AES Encrypt
button is displayed in the System Admin dialog box. Press this button to launch the
encrypted generator to generate enc-password for INI settings. You can set
ShowAESButton=no to hide this button. If Enc-Username and Enc-Password are available,
then the default value is yes, or the default value is no.
NOTE: INI parameter with an asterisk is a newly added parameter.
48 ThinOS 8.5_107