Release Notes

Issue number Issues description Workaround
TL-645 DP audio on Wyse 5070 thin client works only with DP1/2
ports from Intel GPU using DP direct cable. It does not
work with DP3 Intel GPU or AMD GPU mDP/DP ports.
Also, it does not work with DP convertor cable.
There is no workaround.
TIR96028 Connect monitor to DP1 or DP2; either of the ports works
correctly. For multimonitors, connect DP1 rst, and then
connect DP2, the DP audio works with DP1.
There is no workaround.
TL-745 DP audio option is not displayed on playback devices
checklist if you insert DP cable in DP3 port or AMDDP or
if you use any converter.
Reboot the thin client.
TIR95778 When you connect the monitor to DP1 and you upgrade
the ThinOS rmware, the DP audio option may not be
displayed in the Peripherals dialog box.
You must shut down and then power on the thin client.
TIR96293 SessionCong=RDP, GracefulReconnTimeout=xx
If you connect to RDP Windows 10 without RemoteFX
session and enable H.264-AVC444, this ini parameter
causes the session to autodisconnect and reconnect
frequently. The thin client decoder may fail after several
autoreconnect. After thin client decoder fails and after the
main screen goes to sleep or you turn o the main screen,
the session tries to show on the second screen
automatically, and trap winmgr is observed.
This issue is applicable to 8.5_108 build.
Disable, or do not congure the H.264-AVC444.
If your network connection is good, then you need not set
this ini parameter.
TIR94747,
TIR95579,
TIR95441,
TIR95360,
TIR95369,
TIR95352,
TIR95161
Occasionally launching a remote session using the
VMWare Horizon BLAST protocol may result in the
session not working.
Reconnect the session again.
TIR95561 When multiple high resolution monitors are used and set
to Span mode, the display may get blurred.
Reduce the number of monitors that are set to Span
mode.
TIR95098 When DHCP is not present, the Out of Box Experience
may not work.
Press Ctrl+Esc to exit the Out of Box Experience.
TIR95648 Currently, multi-touch is not supported within Citrix
Receiver sessions.
Use a Remote Desktop session.
TIR95336,
TIR95353,
TIR95414
When you connect a monitor with an active RemoteAPP
session, the active RemoteAPP may not rescale, or the
session screen may become blank.
Start the session again.
TIR95276 A black screen is observed, when you use a monitor
connected to an integrated video, and modify the device's
preference, and resetting the device to the factory
default.
Reboot the thin client.
TIR95529 In some instances, a Citrix Receiver session may display a
blurred screen.
Reconnect the session.
TIR95731 In some instances, a session may not be displayed when
you connect VMware Horizon using the BLAST protocol.
Start the session again.
TIR95904 Display fall back may be observed on high resolution
monitors.
This issue will be xed in the future release.
ThinOS 8.5_107 59