Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
desktops are displayed. To get your RemoteApp or desktops
collection name, do the following:
1. In RDS Server local, go to
C:\Users\administrator.RDSS\AppData\Roamin
g\Microsoft\Workspaces\{xxxx}\Resource, and
check that all your published collection (.rdp file) are listed.
2. Open the specify .rdp file which you want to define
in .ini file with notepad and get the collection name from
line "loadbalanceinfo:s:tsv://MS Terminal
Services Plugin.1.[collection name]".
DisableShowDisclaimer=yes—The option is set to yes to
disable popup/pre-logon message and automatically accept
them without intervention when broker type is VMware
View. The default value is no.
DisableShowServer=yes—The option is set to yes to
disable showing the view server URL in sign-on window and
disclaimer window when broker type is VMware View. The
default value is no.
DelCertificate={filename, all, builtin}
filename — Removes the named file from the nand flash or
from the memory.
all — Removes all certificates except built-in certificates
included by default.
builtin — Removes all certificates including the public
certificates included by default.
DesktopColorDepth={16, 32}
[RGB565={no, yes}]
DesktopColorDepth — Sets the desktop color to 16 or 32
bits. If DesktopColorDepth=16, the default color is 15 bits.
RGB565 — Default isno. Applies only if the desktop color is
using 16 bits.
NOTE:
If the RBG565 parameter value is changed to yes, the thin
client will require a reboot.
DHCPExpire={reboot, shutdown}
Default is reboot.
When a DHCP lease expires, a message notifies the user as
follows: DHCP Expired, you must reboot.
reboot — After 5 seconds, the system reboots.
shutdown — After 5 seconds, the system shuts down.
DHCPOptionsRemap={no, yes}
[DisableOption12={no, yes}]
[FileServer={128 to 254}]
[RootPath={128 to 254}]
[FtpUserName={128 to 254}]
[FtpPassWord={128 to 254}]
[RapportServer={128-254}]
[RapportPort={128-254}]
[WDMServer={128 to 254}]
[WDMPort={128 to 254}]
Default is no.
DHCPOptionsRemap — Specifies whether or not the
following options can be set.
The value for each option must be from 128 to 254. Values
for the options must be different for each option. These
options are used to configure DHCP server tags for thin client
booting.
The option DisableOption12 sets if the option tag 12 in DHCP
is accepted or not. As default, DHCP option 12 sets the
hostname and domain name of the terminal. For example,
the information of option 12 is terminal name.wyse.com, the
terminal name will be set as terminalname and the domain
name will be set as wyse.com.
22 Parameters for wnos INI files only