Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Title and ButtonCaption — Specifies the notification
window title and button that can be customized. For example,
NoticeFile=filename Title=Problem
ButtonCaption=Ok
OneSignServer=onesign_server
[DisableBeep={yes,no}]
[KioskMode=yes,no}]
[TapToLock={0,1,2}]
[EnableWindowAuthentication={yes,no}]
[AutoAccess={VMW,XD,XA,LOCAL,RDSHD, RDSHA,
RDSHPC}]
[NetBIOSDomainName={yes,no}]
[SuspendAction={0, 1}]
[DisableHotKey={yes,no}]
Loglevel=0/1/2/3
[DisablePromptToEnroll={
yes,no}]
[SecurityMode={default, full, warning, low}]
A list of host names or IP addresses with optional TCP
port number or URLs of Imprivata OneSign servers. It should
use https protocol. If OneSignServer="" is defined, then only
imprivata virtual channel can work.If DisableBeep is set to yes,
then Rfideas reader can be set to mute when a card is tapped.
Default is no.
If KioskMode is set to yes, then different OneSign user can
unlock the client desktop. Default is no. Optional keyword
TaptoLock is only active when KioskMode=yes.
● If TapToLock=0, then tap a card to lock terminal is
disabled.
● If TapToLock=1(Tap to lock), then use the proximity card
to lock the terminal.
● If TapToLock=2(Tap over), then lock the terminal and log
in as a different user. Default is 2.
If EnableWindowAuthentication is set to yes and OneSign
signon fails, then continue to sign-on with windows credential
to pre-define broker. Default is yes.
If AutoAccess is defined, then auto launch the corresponding
type of broker. Otherwise, get the broker type from the
Imprivata Server setting of computer and user policy. If none
of them is defined, then launch the first available broker
server from the Imprivata server.
If AutoAccess=LOCAL is set, then launch the broker from
the ThinClient setting; the broker getting from the Imprivata
Server is ignored.
NOTE:
AutoAccess can be set in [username].ini and
wnos.ini. The wnos.ini has priority over [username].ini.
If NetBIOSDomainName is set to yes, then Imprivata domain
list will show NetBIOS domain name and card user will
authenticate to the broker server using NetBIOS domain
name. Default is no.
If SuspendAction is set to 0, then lock the terminal when you
tap the card or press the hotkey. If set to 1, then signoff the
terminal. If ‘no’ is defined, then lock the terminal in KioskMode
and sign-off the terminal in none KioskMode.
If DisableHotKey is set to yes, then no action when you press
the hotkey defined in Imprivata Server. Only WebAPI 4 and
later versions support the hotkey function.
Loglevel—While configuring the Imprivata server, user
can view the OneSign logs on ThinOS by enabling the
Agent Logging feature. An ini configuration is needed
correspondingly. Default value is 0. If set to 0, logs are not
displayed.
If DisablePromptToEnroll is set to yes, then ThinOS does not
prompt you to enroll their security answers after OneSign
sign-on. Default value is yes.
Parameters for wnos INI files only
29