Setup Guide

Table 7. General Settings: wnos.ini files, {username} INI, and $MAC INI Files (continued)
If SelectGroup=yes, then the pictures residing in the picture subfolder under
the group folder are displayed. For example,
/wnos/ini/{group_dir}/picture
If group pictures do not exist, global pictures are used. Supported formats
include JPG, GIF, PNG and BMP.
PictureTimer — Specifies the interval to wait in seconds to display another
picture. Default value is 6 seconds.
PictureOrder — Specifies the order of picture files to display. The default is
to use the order of sort from A to Z. If set to random, pictures are displayed
randomly.
PictureCheck — Specifies whether to check for picture files servers or not.
NOTE:
If set to always, the picture files in file servers are checked when the screen
saver starts every time. By default, the system checks for picture files only
when the screen saver starts for the first time to decrease network traffic.
PictureLayout— The optional parameter is used to specify the arrangement
on the desktop when pictures are displayed. For the tile selection, the image
is replicated across the desktop. For the center selection, the image is placed
at the center of the desktop without any image size change. For the stretch
selection, the image is either expanded or shrinked to fill the desktop. The
default value is stretch.
Sleep—The optional parameter is used to specify the interval minutes to stop
soft screen saver and turn off monitor. After the specified minutes, since
software screen saver starts up, the software screen saver is stopped and turns
off the monitor until screen saver is off. The value range is 0 to 180. The value 0
is default which disables this function.
**ShutdownCount={0 to 60} (seconds)
or
**ShutdownCounter={0 to 60} (seconds)
ShutdownCount or ShutdownCounter — Specifies the number of seconds
to count down before the shutdown sequence starts upon using the thin client
power button when there are active sessions.
The default value is 10, however, to commence shutdown immediately and
prevent the display of the countdown dialog box, set the value to 0.
ShutdownInfo={no, yes}
Yes/no option to display various information such as System Version, Terminal
Name, IP Address, and MAC Address in shutdown window.
S10WDMFlash=flash size
Specifies the flash size. This value will be saved into NVRAM and then eported
to the WDM server.
NOTE:
This statement guarantees that all S10 thin clients function with DDC
regardless of flash size.
TimeServer=server_list
[TimeFormat={24-hour format, 12-hour
format}]
[DateFormat={
yyyy/mm/dd, mm/dd/yyyy,
dd/mm/yyyy}]
[GetBiosDT={no, yes}]
TimeServer — Specifies the SNTP time servers to use for time retrieval. If a
time server is not defined, the client CMOS/ BIOS internal clock will be used as
a reference.
TimeFormat — Default is 24-hour format. Specifies the time format to use.
DateFormat — Default is yyyy/mm/dd. Specifies the date format to use.
NOTE:
The TimeFormat and DateFormat settings in a wnos.ini file will be saved into
NVRAM if EnableLocal=yes is set in the wnos.ini file.
58 Parameters for wnos INI, {username} INI, and $MAC INI files