Setup Guide

Table 6. Connection Settings: wnos.ini files only (continued)
Parameter Description
EnrollPwd is the plain-text enrollment password and EnrollPwdEnc is the
encrypted form of the same enrollment password. Use only one of these two
fields to set the used enrollment password.
As a substitute of using EnrollPwd or EnrollPwdEnc to directly specify an
enrollment password, client allows using a SCEP administrator's credential
to automatically get an enrollment password from a Windows SCEP
server. In this case, the ScepUser, ScepUserDomain, ScepUserPwd (or
ScepUserPwdEnc, in encrypted form instead of plan-text) are used to
specify the SCEP administrator's credential, and ScepAdminUrl must be set
correctly to specify the corresponding SCEP admin web page's URL. If
neither EnrollPwd nor EnrollPwdEnc is set, client will try to use these set
of settings to automatically get an enrollment password and then use that
password to request a certificate. If communication security is necessary in
your environment during this phase, please add https:// as the prefix for
ScepAdminUrl to use HTTPS instead of the default HTTP protocol.
Use ScepAutoEnroll=no AutoRenew=yes to only enable SCEP auto renew; all
other parameters are not needed if ScepAutoEnroll is set to no.
NOTE: SCEP server’s URL must be an HTTP or HTTPS link. Do not add
protocol prefix to RequestURL and ScepAdminURL.
SelectServerList={PNA, VDI}
[Default=default_desc]
list of servers {Server1; Server2; ...ServerN}
Allows users to select one PNA or VDI server during logon. For server use the
format:
description = <server’s description> host = <server’s url> [ <options>]
NOTE: There must be “description” and “host” key words on each server.
For PNA server options, use the options of the PnliteServer parameter in
Connection Settings: wnos.ini files, {username} INI, and $MAC INI Files.
PNA example:
SelectServerList=PNA Default=test3 description =
test1 host = 192.168.0.10 autoconnectlist
=* reconnectfrombutton=0 description = test2 host =
HostName2.wyse.com TimeOut=200 descriprion = test3 host
= https://server3.wyse.com
For a VDI server: If you want to use a VDI broker, specify ConnectionBroker
in wnos.ini. Otherwise the VDI broker’s type is default.
VDI example:
ConnectionBroker=vmware
SelectServerList=VDI \
Default=test5 \
description=test4 host=192.18.0.11 \
description=test6 host=host2
The Default option following "SelectServerList={PNA, VDI}" can specify the
default server. The value is one of server description defined after that. After
one selects another server and sign off, this default server is selected. If
default option is not specified, the last selected server is selected in the next
sign on.
Service={snmpd, thinprint, vncd
vda <port number>} disable={no, yes}
Service — Specifies the services you can enable or disable; there are
different syntaxes for the different services.
disable — Default is no. Yes/no option to disable the services. Disable must
follow the Service parameter.
Parameters for wnos INI files only 33