Setup Guide
Table Of Contents
- Dell Wyse ThinOS Version 8.6 INI Reference Guide
- Introduction
- Getting Started: Learning INI File Basics
- Parameters for wnos INI files only
- Parameters for wnos INI, {username} INI, and $MAC INI files
- Connect Parameter: Options
- TimeZone Parameter: Values
- Best Practices: Troubleshooting and Deployment Examples
Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
SmartcardPassthrough — Default is yes. Yes/no option to
enable/disable the smartcard pass through mode.
StoreFront — Default is no. Yes/no option to support
Citrix StoreFront Authentication. The value will be saved into
NVRAM.
HttpUserAgent—The option will replace the default
CitrixReceiver WTOS/1.0 during Netscaler login. If you are
using WTOS/1.0 as Netscaler Session Policy, set this INI
parameter to retain your Netscaler policy configuration.
CAGSendDomain—This option sends domain as domain\user
to external network Netscaler to support Netscaler and DUO
passcode authentication. The default value is no.
SFIconSortMode sorts storefront dekstop icon. The default
value is 0.
0— sorts by the position value from server side.
1—sorts in alphabetic order.
2—sorts in alphabetic order with desktop first.
3—sorts in alphabetic with application first.
IgnoreDefaultGateway—When the value is Yes, the default
gateway of the selected store during Netscaler login is
ignored. Always use pnliteserver to continue. When the value
is set to no, the Netscaler server is used as default gateway
to reset the login again. The default value is no.
CAGUserAsUPN—This parameter sends user details to
server in the format similar to an email address—
username@fqdn. Certain third party authentication for
Netscaler requires this format. For example, Okta
authentication.
CAGExternal—This parameter logs in csg with external
network mode directly without check beacons since it
consumes most of the logon time.
DisableSFInit—This parameter disables storefront initialize
process during client start, since it takes time and not
mandatory.
RTPTosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7/
AF11/AF12/AF13/AF22/AF23/AF31/AF32/AF33/AF42/
AF43/EF}
Sets RTP/UDP audio channel in the TOS fields.
SaveSysinfo={usb, _proto_, _full_url_}
[ScardLog=0xF ]
[Username=_username_]
[Password=_password_]
[Size=_file_length_limit]
[Append={yes, no}]
Configure the target clients to save the event logs.
full_url—If set as a specified full url name, it
is saved into the specified url. Otherwise, it is
saved as a file name, such as /wnos/troubleshoot/
{TERMNAME}_LOG_{DATE}_{TIME}.txt.
usb—If set to usb, it is saved into the last mounted USB disk.
proto—If set to a protocol, for example, ftp, http or https, it
is saved into the file server with this protocol.
Scardlog—The Smart card Log option is a bit mask to control
the following logs:
Parameters for wnos INI, {username} INI, and $MAC INI files 85