Setup Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
[ActiveVisible={no, yes}] always be prompted before shadowing starts and the user will
then decline or accept VNC shadowing;
VNCPrompt set to no means the user will not be able
to decline or accept shadowing. See also MaxVNCD in
Connection Settings for wnos.ini files only to enable VNC
shadowing.
See also VncPassword in Connection Settings for wnos.ini
files only to specify a string of up to 8 characters as the
password used for shadowing.
Accept, Reject — Default is 10. Specifies the amount of
time (in seconds) a user has to accept or reject the VNC
shadowing prompt before the client desktop is shadowed.
ViewOnly — Default is no. Yes/no option to specify that the
desktop being shadowed can only be viewed by the person
who is shadowing; no keyboard or mouse events are allowed
to interfere with the thin client being shadowed.
ActiveVisible — Default is no. Yes/no option to display a
VNC session-end notice after the VNC session ends.
VPN=openconnect
[Description=string_description]
[Server=server_ip_or_name]
[Username=username_string]
[Password=password_string]
[Autoconnect={yes, no}]
[Username-enc=encrypted_username_string]
[Password-enc=encrypted_password_string]
Folder=[folder]
The INI parameter openconnect enables you to connect
to Cisco AnyConnect VPN servers, that use standard TLS
protocols for data transport.
Description— Specifies the session name. The length of the
string is limited to 21 characters.
Server— Specifies the VPN server IP or the VPN server
name. The length of the string is limited to 63 characters.
Username— Specifies the login username. The length of the
string is limited to 31 characters.
Password— Specifies the login password. The length of the
string is limited to 31 characters.
Autoconnect— Specifies the option to enable or disable
auto-connect on system startup.
Username-enc— Specifies AES encrypted Login Username
Password-enc— Specifies AES encrypted Login Password
Folder— Specifies the grouping of connections. Displays
the folder on ThinOS desktop only if the mode is classic
mode and the paraneter signon is set as signon=yes
icongroupstyle=folder. The folder can include sub folders,
for example, connect=rdp host=10.151.122.71 icon=default
folder=rdp\test1
[PowerFnKeyDisable={0,1}]
[PowerFnKeyDisable={0,1}]—This parameter is used to
disable the Fn+Insert key. This parameter is only available for
Wyse 5470 Thin Client. Default is set to 0.
[ClassicModeAppsEnable={0,1}] [ClassicModeAppsEnable={0,1}]—This parameter is used
to display the published applications with the Keyword
Mandatory property. This parameter is only available for a
Citrix Broker in the classic mode. Default is set to 0.
Parameters for wnos INI, {username} INI, and $MAC INI files 97