Setup Guide

Table 5. Connection Settings: wnos.ini files only (continued)
Parameter Description
The SCHidePINLeft parameter enables you to hide or display the number of
attempts remaining to enter a correct PIN for the smart card. The default
value is no.
[BitmapsMap={yes,no}]—When the value is set to yes, this parameter
enables the mapping of built-in bitmaps to customized bitmaps.
You should set the value MirrorFileServer=yes when enabling bitmaps
mapping so that the mapping files are loaded from the local drive while
rebooting.
The text file name is bitmaps.map and is similar to PrinterMap file.
Each line in the file is of format "built-in bitmap file name" = "customized
bitmap files". For example: m_pcoip.ico=1-1_16.png pcoip.ico=1-1_32.png
vdm.png=3_355x85.png horizon_wallpaper.jpg=Bugatti-Veyron-Wallpaper-
Hd-1080p-uSa4W-1366x768.jpg
If the bitmaps are mapped for the first time, it is recommended to reboot the
system manually so that the files are loaded accurately.
[EnableMessage={yes, no}]—Default is yes. This parameter is used to
display the warning message on the signon window based on the file server
path. A warning message is displayed on top of the signon window when
the FTP/HTTP is configured on the file server path. This parameter also
addresses the vulnerability issue—PSRC–12979.
Speedbrowser={on, off}
Default is on.
On/off option to enable the ICA Speed screen Browser Acceleration Function.
Sleep=[yes, no]
[program=[Sleep, Power off]]
[timer=[0, 1, 5, 10, 15, 30, 60, 120, 300, 600]
[MaxSleepPeriod]=[0-255]]
Sleep—This parameter enables or disables the sleep mode feature. The sleep
mode enables the thin client to enter the power-saving state and quickly
resumes full power operations without loss of data. The default value is yes.
Program—This parameter specifies whether the thin client must enter the
sleep mode or power off after the screen is turned off by screen saver. The
default value is Sleep.
Timer— This parameter specifies the time in minutes to either enter the
sleep mode or shut down the client after the screen saver starts. The default
value is 10 minutes.
MaxSleepPeriod—This parameter specifies the maximum time period the
thin client is allowed to be in sleep mode. The thin client reboots after
resuming from sleep mode. If you set the value as 0, the thin client resumes
from sleep mode without rebooting.
Primary unit is day, and the current unit is hour. The default value is set to
one hour, and its range is 0 to 255.
SwitchApplication
NOTE: DISCONTINUED. DO NOT USE.
SysMode={classic, vdi, VMware, Citrix}
[toolbardisable={no, yes}]
[toolbardisablemouse={
no, yes}]
[toolbarclick={no, yes}]
[toolbardelay={0-4}]
[toolbar_no_conmgr={no, yes}]
[toolbar_no_minimizeall={
no, yes}]
[toolbardisablehotkey={no, yes}]
[ToolbarEnableOneSession={no, yes}]
SysMode — Specifies the Zero interface optimized for VDI or the Classic
interface. This value will be remembered across reboots until changed. If not
defined and an INI is present, Classic mode is the default. If no INI is present,
VDI mode is the default.
Classic mode has full taskbar, desktop and connection manager and
is recommended for a terminal server environment and for backward
compatibility with WTOS 6.x.
VDI mode (Zero interface) has a new launchpad-style interface optimized
for full-screen sessions that is Desktops. Everything you need is accessed
through an always available overlay interface.
Parameters for wnos INI files only 37