Setup Guide

Table 8. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
**AltCacheDisable={no, yes}
Default is no.
Yes/no option to disable the new cache mechanism allowing
more memory to be available to a user. This is developed with
Citrix Presentation Server 4.0 and Windows Server. If set to
no, the new cache mechanism is enabled.
**Alternate={no, yes}
Default is no.
Yes/no option to use an alternate IP address returned from an
ICA master browser to get through firewalls. This setting in a
wnos.ini file will be saved into NVRAM if EnableLocal=yes is
set in the wnos.ini file.
AutoDetectNetwork={yes, no}
RDP Only.
Default is yes.
Yes/no option to enable RDP auto detect network feature.
When this option is set to yes the Optimize for low speed
link and the Desktop Experience options are disable by
default.
**AutoSignoff={no, yes, 2-60}
[Shutdown={no, yes}]
[Reboot={
no, yes}]
Default is no.
AutoSignoff —This option can be used to automatically sign-
off a user when the last opened session is closed. The default
value is no. A value ranging from 2 to 60 can be configured.
This value represents the number of seconds a session must
be active prior to calling AutoSignOff.
Shutdown — Default is no. Yes/no option to shut down the
thin client. If shutdown is set to yes, the ShutdownCounter
value is used to control the count-down before the system is
turned off.
Reboot — Default is no. Yes/no option to reboot the thin
client. If Reboot is set to yes, the ShutdownCounter value
is used to control the count down before the system is
rebooted.
ClearLicense={no, yes}
Default is no.
Yes/no option to clear the TSCAL license stored in the non-
volatile memory. It can be replaced by FixLicense=clean.
Connect={ICA, RDP}
Connect — Connection protocol. Follow the ICA option list,
see ICA Connect Options or RDP option list, see RDP Connect
Options. Any options you use for your connection must be on
the same logical line; \can be used for line continuation, see
Rules and Recommendations for Constructing the INI Files.
ConnectionBroker={default, VMware, Microsoft, Quest, AWS}
[EnableAWSREGCode={yes,no}]
Default is default.
Specifies the Connection Broker type. Select VMware to
enable VDM XML support. If you enter VMware, the VMware
logo appears on the login screen.
For Dell vWorkspace broker, ConnectionBroker=Quest is
recommended.
70 Parameters for wnos INI, {username} INI, and $MAC INI files