Setup Guide

Table 8. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
[WlanNextRoam={0, None}]—This parameter defines the
minimum time in seconds between two consecutive roaming
events. The default value is 5 seconds.
For example, Device=wireless WlanNextRoam=10
[WlanFnKeyDisable={0,1}]—This parameter is used to
disable the Fn+PrtScn key in a wireless connection. This
parameter is only available for Wyse 5470 Mobile Thin Client.
Default is set to 0.
[DeleteWirelessProfile={0,1}]— This parameter is used to
delete the specified wireless profile from the NVRAM. Default
is set to 0.
For example, device=wireless SSID=ThinOS
DeleteWirelessProfile=yes will delete the ThinOS SSID from
the NVRAM if configured.
DISABLETSGW
NOTE: Discontinued. Do not use. See TSGWENABLE
**EnableLocal={no, yes}
[HideDefault={no, yes}]
Default is no.
Yes/no option to enable locally configured entries to show
in the Connect Manager list. When connections defined in
local NV-RAM are displayed in the Connect Manager, they are
marked with an asterisk.
If EnableLocal=yes is in a wnos.ini file, then the global
information will be saved into NVRAM.
NOTE: The global information includes: SEAMLESS,
ALTERNATE, Reconnect, icaBrowsing, LowBand,
NoReducer, Time settings, and Printer settings in a
wnos.ini file.
HideDefault — Default is no. Yes/no option to hide the
default ICA and RDP connections that are present on the
devices.
ENABLETSGWSAMEINFO
NOTE: DISCONTINUED. DO NOT USE.
*EthernetSpeed={Auto, 10M HD, 10M FD, 100M HD, 100M
FD, 1000M}
Default is auto.
EthernetSpeed — Specifies the Ethernet Speed to either
Auto, 10M HD, 10M FD, 100M HD, or 100M FD. Once
specified, it is saved in the non-volatile memory. This
parameter can be replaced by the Device and Speed
parameters.
NOTE:
If the EthernetSpeed parameter value is changed, the thin
client will require a reboot.
Fastconnect={yes, no}
[Key={F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, Pause/
Break}]
[Ctrl={yes, no}]
[Alt={yes, no}]
If you set the parameter to yes, press the special key
to launch specified desktop or published application. If the
desktop or published application is available, pressing the key
brings it to the foreground.
Parameters for wnos INI, {username} INI, and $MAC INI files 75