Reference Guide
Parameter Description
[RootPath={128 to 254}]
[FtpUserName={128 to 254}]
[FtpPassWord={128 to 254}]
[RapportServer={128-254}]
[RapportPort={128-254}]
[WDMServer={128 to 254}]
[WDMPort={128 to 254}]
[PnliteServer={128 to 254}]
[DomainList={128 to 254}]
[VDIBroker-{248 to 254}]
[RapportSecurePort={128-254}]
[Discover={yes, no}]
[WDMSecurePort={128 to 254}]
[WDMFQDN={128-254}]
[CCMGroupKey={128-254}]
[CCMServer={128-254}]
[CCMMQTTServer={128-254}]
[CCMCAValidation={128-254}]
The value for each option must be from 128 to 254. Values for the
options must be dierent for each option. These options are used
to congure DHCP server tags for thin client booting.
The option DisableOption12 sets if the option tag 12 in DHCP is
accepted or not. As default, DHCP option 12 sets the hostname
and domain name of the terminal. For example, the information of
option 12 is terminal name.wyse.com, the terminal name will be set
as terminalname and the domain name will be set as wyse.com.
If you set dierent value for DisableOption12 from the value in
NVRAM, the system will automatically reboot to make the value
valid. (CIR36891)
RapportSecurePort— Species the HTTPS port of WDM server.
It is in 6.3 to support WDM4.7.
Discover—If Discover=yes, the device fetches Wyse DHCP
options from DHCP server, otherwise, it prevents the device from
fetching those information. Default value is yes. If the device
receives FileServer/WDMServer information through the DHCP
server, then the associate User interface is protected.
NOTE:
WDMSecurePort is the specied HTTPS port of the WDM
server.
WDMServer—Value 186 species the IP address of WDM server.
Value 192 species the HTTP port of WDM server.
WDMSecurePort—Species the HTTPS port of WDM server.
WDMFQDN — Species the Fully Qualied Domain Name (FQDN)
of the WDM server.
NOTE
: The CCMGroupKey, CCMServer,
CCMMQTTServer and CCMCAValidation options are
specied to remap the tags for CCM conguration.
DHCPUserClassID=class_id
[ParseVendorInfo={no, yes}]
DHCPUserClassID — Species the UserClassID used for DHCP.
ParseVendorInfo — Default is yes. Yes/no option to specify
whether or not ThinOS will interpret DHCP option 43.
This is a vendor-specic information. If ParseVendorInfo is set to no
and the DHCPVendorID is also used with this parameter, you must
set ParseVendorInfo=yes and then reboot the thin client twice.
Maximum of 26 characters are allowed in a string.
DHCPVendorID=vendor
[ParseVendorInfo={no, yes}]
DHCPVendorID — Species the VendorID used for DHCP.
ParseVendorInfo — Default is yes. Yes/no option to specify
whether or not ThinOS will interpret DHCP option 43.
This is a vendor-specic information. If ParseVendorInfo is set to no
and the DHCPVendorID is also used with this parameter, you must
set ParseVendorInfo=yes and then reboot the thin client twice.
Maximum of 26 characters are allowed in a string.
DisableDomain={no, yes}
Default is no.
22 Parameters for wnos INI les only