Reference Guide

Parameter
* Global overrides identically-named user prole
** After sign o, user prole returns to global value
Description
If TapToLock=0, then tap a card to lock terminal is disabled. If
TapToLock=1 (Tap to lock), then use the proximity card to lock the
terminal.
If TapToLock=2 (Tap over), then lock the terminal and log in a
dierent user.
EnableWindowAuthentication — Default is yes. Yes/no option to
sign-on with the user’s Windows credentials to pre-dened broker
if the OneSign sign-on fails.
AutoAccess — Species the corresponding type of broker to
automatically start. If not dened, the broker type is obtained from
the Imprivata Server setting of the computer and user policy. If
none of them is dened, then the rst available broker server from
the Imprivata server is started.
NOTE:
AutoAccess can be set in [username].ini and wnos.ini,
however, the wnos.ini, has priority over [username].ini.
NetBIOSDomainName — Default is no. Yes/no option to enable
the authentication to the broker server using the NetBIOS domain
name. If set to yes, the Imprivata domain list will show NetBIOS
domain name and the card user will authenticate to the broker
server using the NetBIOS domain.
ConnectTimeout species the timeout value for OneSignServer
connection. The value ranges from 0 to 65535 seconds. The value
0 species the default TCP timeout value.
PnliteServer=<List of {IP address, DNS names, or URLs} >
[ReconnectAtLogon={0, 1, 2}]
[ReconnectFromButton={0, 1, 2}]
[AutoConnectList={*/ appname1;appname2; appname3...}]
[Timeout=5…300]
[CAGRSAAuthMethod={LDAP, RSA}]
[CAGAuthMethod={LDAP, RSA, LDAP+RSA, RSA+LDAP}]
[RequestIconDataCount={0-65535}]
[DefaultSettings={XenApp, XenDesktop}]
[SmartcardPassthrough={yes, no}]
[StoreFront={no, yes}]
[HttpUserAgent={UserAgent}]
[CAGSendDomain= {yes, no}]
[SFIconSortMode={0, 1, 2, 3}]
[IgnoreDefaultGateway={yes, no}]
PnliteServer
— Species the list of IP addresses or host names
with optional TCP port number or URLs of PNAgent/PNLite
servers. The list is empty by default.
Each entry with optional port is specied as Name-or-IP:port,
where port is optional; if not specied, port 80 is used as the
default.
If a port other than 80 is used, the port number must be specied
explicitly with the server location in the form IP:port or name:port.
Once specied, it is saved in the non-volatile memory.
The statement PNAgentServer and Web interface for Citrix
MetaFrame Server is equal to this statement.
NOTE:
PnliteServer and the DomainList parameters can be used in a
{username}.ini le, but generally are used only in a wnos.ini
le.
The PNAgent/PNLite server list and associated domain list
optionally can be entered in DHCP server options 181 and
182, respectively. If entered in both places, the entries from
the Connection Settings: wnos.ini les, {username} INI, and
$MAC INI Files will take precedence. However, the
{username}.ini le will override the wnos.ini le if the identical
parameters with dierent values exist in the {username}.ini
le.
Parameters for wnos INI, {username} INI, and $MAC INI les 79