Setup Guide

Table 4. General Settings: wnos.ini files only (continued)
[disable={yes/no}] Display—If the value is set to yes, the username field in sign-
on window will be displayed. By default the value is set to no
and the field will be obscured with asterisks (*).
disable— If the value is set to yes, the user name field in
sign-on window is disabled.
Password=<sign-on password>
[disable={yes/no}]
[encrypt={no, yes}]
Password— Specifies the password as the sign-on
password. There is no minimum length. The maximum length is
64 characters.
In wnos.ini this sets as the default password. The system will
sign on automatically and not wait for username, password,
and domain entries.
Disable—If the value is set to yes, the password field in sign-
on window is disabled. Default is no.
encrypt - The default value is no. The options are used to
enable or disable an encrypted string for a password in the
INI file instead of clear text. If the value is set to yes, the
password in the INI is an encrypt string instead of clear text.
DisableButton={no, yes}
[DisableRestart={yes, no}]
Default is no.
Yes/no option to disable the power button.
If you set the option DisableRestart=yes, the radio button
Restart the system in shutdown window is disabled. These
settings are saved permanently and the default value is no.
EnableCacheIni
NOTE: Supported on Wyse 3010 thin client with ThinOS
(T10) and Wyse 3020 thin client with ThinOS (T10D) only.
EnableCacheIni is no longer supported and cannot be used
on platforms other than the Wyse 3010 thin client with
ThinOS (T10). On platforms other than the Wyse 3010 thin
client with ThinOS (T10), EnableCacheIni is replaced by the
MirrorFileServer parameter, see MirrorFileServer parameter in
General Settings for wnos.ini Files Only. Use EnableCacheIni
on Wyse 3010 thin client with ThinOS platform (T10) only.
This is because there is no local flash on Wyse 3010 thin
client with ThinOS (T10) platform, and the MirrorFileServer
parameter is not supported on it.
EnableGKey={yes, no}
Default is yes.
Yes/no option to enable G key reset. G key reset is supported
for Privilege=High in the NVRAM.
Exit={yes, no, all}
Default is yes.
Specifies the INI file processing.
yes — Processing returns to the prior INI file on the next line
after $include.
no — There is no operation.
all — All INI file processing is exited.
Include=<$mac.ini file or {username}.ini file> <$MAC.ini> Loads /wnos/inc/mac-address.ini.
NOTE:
The file name does not include the symbol : in the mac
address. See also the Exit parameter for information
on how to terminate Include. <{username}.ini> Loads /
wnos/inc/{username}-address.ini.
16 Parameters for wnos INI files only