Setup Guide

Table 7. General Settings: wnos.ini files, {username} INI, and $MAC INI Files (continued)
right-click the time label in taskbar, nothing is displayed. The Change Date and
Time button in System Preference will be invisible.
EnableVPNManager—If the optional EnableVPNManager=yes is set with
Privilege={none, low}, the VPN Manager setup is enabled.
TrapReboot— If the optional TrapReboot=yes is set, client reboots after the
execution of the trap.
EnableCancel— If the optional EnableCancel=yes is set with Privilege={none,
low}, the counter down window for reboot or shutdown can be cancelled. The
default value is no.
For example, set the following ini,
Inactive=1
AutoSignoff=yes Shutdown=yes
ShutdownCounter=30
Privilege=none EnableCancel=yes.
After no mouse and keyboard input in 1 minute, the system will pop up a counter
down window to shut down in 30 seconds. You can cancel it.
EnablePeripherals—If the optional EnablePeripherals is set with
Privilege=none, the specified peripherals tab will be enabled. The value of the
option can be a list of any valid value separated with "," or ";". For Camera,
Touchscreen and Bluetooth, they can be enabled only, if the devices are
available.
For example, Privilege=none lockdown=yes
EnablePeripherals=mouse,audio,camera,bluetooth, then mouse and audio
tab will be enabled. If there are camera and/or bluetooth devices,
the camera and/or bluetooth tab will be enabled too. The optional
EnableKeyboardMouseSettings=yes can be replaced as: Privilege=none
lockdown=yes EnablePeripherals=keyboard,mouse.
FastDHCP— FastDHCP identifies the gateway first. If the gateway is same as
the network before disconnection and the previous DHCP information is valid,
the same information is used. The default value is yes.
ResourceURL={yes, no}
[Type={Picture}]
[URL=_url_path_]
[User=_user_name]
[Password=_password_]
[Encrypt={yes, no}]
The resource files have their specified default path in file server, for example,
the pictures for Showing Picture screen saver are from the folder /wnos/
picture in file server (default), and the bitmap are from /wnos/bitmap.
ResourceURL—If this option is set to yes, the subsequent options are use to
configure one or more resource URL. The system fetches the resource files
from the new URL.
If this option is set to no, all the subsequent options are to be ignored.
Type—This option specifies the resource type. Currently, only Picture is
supported, which is for Showing Picture screen saver.
URL—This option specifies a new URL of the resources.
User and Password—These options specify the credentials of the new
resource URL.
Encrypt—This option specifies whether or not the password is encrypted. For
example, ResourceUrl=yes type=picture url=ftp://10.151.120.15/pic1 user=pteng
password=xxxxxx encrypt=no
**ScreenSaver=value{0, 1, 3, 5,
10, 15, 30}
[LockTerminal={0, 1, 2, 3}]
[Type={0, 1, 2, 3, 4}]
[VideoLink=httplink]
Screensaver— Specifies to put the thin client in a screensaver state when the
time limit for inactivity is reached, that is delay before starting is reached.
Default value is 10. Value and delay before starting the screensaver:
0 — Disabled
1 — 1 Minute
56 Parameters for wnos INI, {username} INI, and $MAC INI files