Setup Guide

Table 7. General Settings: wnos.ini files, {username} INI, and $MAC INI Files (continued)
GetBiosDT — Default is no. Yes/no option to obtain time from BIOS/CMOS
when the timeserver is not available or cannot be contacted.
For Example:
TimeServer=time.nist.com\TimeFormat=24-hour
formatDateFormat=mm/dd/yyyy
or
TimeServer=time.nist.gov\
TimeFormat=24-hour format\
DateFormat=mm/dd/yyyy
WakeOnLAN={yes, no}
Default is yes.
Wake-on-LAN allows a thin client to be turned on or woken up by a network
message.
If WakeOnLAN=yes, ThinOS will respond for the Wake-On-LAN packet for a
remote wake up.
If WakeOnLAN=no, ThinOS will not respond for the Wake-On-LAN packet.
NOTE:
To use the WakeOnLAN parameter with a C10LE, the C10LE must use BIOS
version 1.0B_SPC001 or later.
Peripheral settings for wnos.ini files, {username} INI,
and $MAC INI files
The following table contains the parameters used for configuring peripheral settings such as keyboard, monitor, mouse, printers
and bluetooth devices. The underlined values are default values.
Table 8. Peripheral Settings for wnos.ini Files, {username} INI, and $MAC INI files
Parameter
* Global overrides identically-named user profile
** After sign off, user profile returns to global value
Description
DefaultPrinter={LPD1, LPD2, LPD3, LPD4, COM1, COM2,
LPT1, LPT2, SMB1, SMB2, SMB3, SMB4}
Specifies the default printer. Be sure the printer set as
default is enabled or the setting will be invalid.
Device=audio
volume={low, middle, high} or {0 to 25}
mute={
0, 1, 2, 3}
[mic_vol={high, middle, low} or {0-25}]
[mic_mute={yes, no}]
[mic_boost={yes, no, 1, 2, 3, 4}]
[min_cache={
1-50}]
[EnableSpeaker={yes, no}][
[playback={device name string}]
[record={device name string}]
[mic_gain_device={device name string}]
Specifies the local thin client audio volume.
volume — Default is middle. Specifies the volume level.
high — maximum volume
middle — medium volume
low — minimum volume
Values of 0-25 provide more exact volume level
mute — Default is 0. Option to enable/disable mute.
0 — no mute
1 — mutes audio
2 — mutes audio and system beep
3 — mutes system beep
Parameters for wnos INI, {username} INI, and $MAC INI files 59