Setup Guide
Table Of Contents
- Dell Wyse ThinOS Version 8.5 INI Reference Guide
- Introduction
- Getting Started: Learning INI File Basics
- Parameters for wnos INI files only
- Parameters for wnos INI, {username} INI, and $MAC INI files
- Connect Parameter: Options
- TimeZone Parameter: Values
- Best Practices: Troubleshooting and Deployment Examples
Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
SmartcardPassthrough — Default is yes. Yes/no option to
enable/disable the smartcard pass through mode.
StoreFront — Default is no. Yes/no option to support
Citrix StoreFront Authentication. The value will be saved into
NVRAM.
HttpUserAgent—The option will replace the default
“CitrixReceiver WTOS/1.0” during Netscaler login. If you are
using “WTOS/1.0” as Netscaler Session Policy, set this INI
parameter to retain your Netscaler policy configuration.
CAGSendDomain—This option sends domain as domain\user
to external network Netscaler to support Netscaler and DUO
passcode authentication. The default value is no.
SFIconSortMode sorts storefront dekstop icon. The default
value is 0.
0— sorts by the position value from server side.
1—sorts in alphabetic order.
2—sorts in alphabetic order with desktop first.
3—sorts in alphabetic with application first.
RTPTosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7/
AF11/AF12/AF13/AF22/AF23/AF31/AF32/AF33/AF42/
AF43/EF}
Sets RTP/UDP audio channel in the TOS fields.
SaveSysinfo={usb, _proto_, _full_url_}
[ScardLog=0xF ]
[Username=_username_]
[Password=_password_]
[Size=_file_length_limit]
[Append={yes, no}]
Configure the target clients to save the event logs.
full_url—If set as a specified full url name, it
is saved into the specified url. Otherwise, it is
saved as a file name, such as /wnos/troubleshoot/
{TERMNAME}_LOG_{DATE}_{TIME}.txt.
usb—If set to usb, it is saved into the last mounted USB disk.
proto—If set to a protocol, for example, ftp, http or https, it
is saved into the file server with this protocol.
Scardlog—The Smart card Log option is a bit mask to control
the following logs:
● 0x1 Context log
● 0x2 Handle log
● 0x4 Status log
● 0x8 Transfer log
Username and Password—The options specify the account
of the file server or url. If not set, the default account of file
server is used.
Size—This option specifies the file size limitation. When the
file is greater than the specified size, the file will be cleared.
Append—This option appends the event log to the same file
name instead of creating a new file. It is only valid for full url
with ftp. The protocol http or https is also supported from
8.4.1 release.
For example, savesysinfo=http://10.151.121.3/
wnos/yyy.txt username=administrator
password=wyseatc append=yes Size=4000.
78
Parameters for wnos INI, {username} INI, and $MAC INI files