Setup Guide

Table 9. Connection Settings: wnos.ini files, {username} INI, and $MAC INI files (continued)
[TosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7/
AF11/AF12/AF13/AF22/AF23/AF31/AF32/AF33/AF42/AF43/
EF}]
[DiskMapTo=a character sequence]
[SysMenu={remote, local}]
[SessionReliability={
no, yes}]
[WarnPopup={yes, no}]
[ondesktop={
no, yes, all, none, desktops, applications}]
[AudioQuality={default, high, medium, low}]
[USBRedirection={TCX,
ICA|HDX}]
[ZLKeyboardMode={0, 1, 2}]
[ZLMouseMode={0, 1, 2}]
[SucConnTimeout=seconds]
[HDXFlashUseFlashRemoting={Never,Always}]
[HDXFlashEnableServerSideContentFetching={Disabled,Enabl
ed}]
[EnableRTME={
Yes, No}]
[FlipByTimer={0, 1}]
[RefreshTimeOut={dd:hh:mm}]
[Timeout={Yes, No}]
[PasswordExpireNotify={yes, no}]
[RefreshPopupNotice={yes, no}]
[DisableReceiverLogo={Yes, No}]
[MMRClientFetchDisabled={Yes, No}]
[ClientName=_client_name_]
mapdisksunderz — DISCONTINUED. DO NOT USE.
TosIpPrecedence — Allows you to set IP Precedence in the
TOS fields.
TosDscp — Sets IP DSCP in the TOS fields.
DiskMapTo — Specifies to map disks to a character
sequence.
NOTE:
A sequence of characters can be used by DiskMapTo, with
each letter mapped to one disk in order. For example,
if RTNM is the sequence, R is mapped to the first disk
(in ThinOS, it will be D:/), T is mapped to the second
disk (in ThinOS, it will be E:/), and so on. Only the
letters “a” through “y” and “A” through “Y” are accepted;
All lowercase letters are changed to uppercase, other
characters will be skipped, and duplicate characters will
be omitted.
For example, #GGefZzedAF1JaE will be mapped to
GEFDAJ. The number of disks mapped to the session
depends on the number of valid letters provided. If no
letter is provided, all disks will be mapped to the session
using default driver letters.
SysMenu — Default is local. Specifies the system menu
mode when right-clicking the taskbar button of a seamless
window. If it is remote, the system menu will come from the
remote server; otherwise, it will be the local menu.
SessionReliability — Default is no. Yes/no option to enable
session reliability.
WarnPopup— If WarnPopup=no, the option can disable the
warning message when session reliability happens in order to
decrease the administrative support calls.
ondesktop — Default is no. Specifies options for displaying
connection icons on the desktop:
1. If AutoConnectList is set in the PNLiteServer statement,
all connections configured in AutoConnectList parameter
will display on the desktop.
2. Default is no and means that the property of ondesktop
will be controlled by the server. However, the connections
are still always added to the Connect Manager list and
PNA menu list.
3. In cases other than no, the connection is controlled by the
local thin client. If set so that the connection icon does
not display on the desktop, the connection icon will not be
added to the Connect Manager list and the PNA menu list.
all — same as yes, display all connections on desktop.
none — do not display any connections.
desktops — only display connections on desktop.
applications — only display applications, the connections will
be handled as an ondesktop_list. For example, if you set
ondesktop=word; excel, then only the applications word and
excel will be displayed.
Parameters for wnos INI, {username} INI, and $MAC INI files
83