Setup Guide

Table 5. Connection Settings: wnos.ini files only (continued)
Parameter Description
[ToolbarAutoQuit={yes, no}]
[ToolbarStay={1~20}]
[EnableLogonMainMenu={
no, yes}}
[HorizonIsClassic=[yes, no]]
VMware mode looks similar to VDI mode but only allows VMware horizon
broker. Login window and wallpaper is specific to horizon.
Citrix mode makes the client turn to Xenith. Xen.ini is prefered in the next
reboot.
NOTE: VMware mode and Citrix mode can only be used under wnos.ini.
ZeroTheme is the alias for SysMode. You can also use ZeroTheme=xxx in
wnos.ini.
The following options allow you to configure only when the Zero toolbar
displays under VDI mode:
Toolbardisable — Default is no. Yes/no option to disable the Zero toolbar
from displaying; if set to yes, this option overrules other toolbar display
options.
Toolbardisablemouse — Default is no. Yes/no option to disable the Zero
toolbar from automatically displaying once you pause the mouse pointer on
the left side of the screen for a specified amount of time.
toolbarclick — Default is no. Yes/no option to pop up the toolbar only if
clicking on the left-most side of the screen.
toolbardelay — Specifies the seconds to delay before displaying the toolbar
after pausing the mouse pointer on the left-most side of the screen. The
value 0 will have no delay. The other values 1, 2, 3,4 will delay 0.5, 1, 1.5 and 2
seconds respectively.
toolbar_no_conmgr — Default is no. Yes/no option to hide the Home
button.
toolbar_no_minimizeall — Default is no. Yes/no option to hide the Home
button thus affecting the ability to minimize displayed list of connections.
toolbardisablehotkey — Default is no. Yes/no option to disable the
CTR+ALT+UP ARROW keyboard shortcut that allows the toolbar to instantly
display without a timer.
ToolbarEnableOneSession — Default is no. Yes/no option to enable the
toolbar when only one session is available.
ToolbarAutoQuit — Default is yes. ToolbarAutoQuit=no prevents the sub-
window from being closed. The toolbar will auto-hide after a certain amount
of time after user pause the mouse pointer away from the toolbar.
ToolbarStay — ToolbarStay={1~20} controls the auto-hide duration, 0.5s
per value. Thus if ToolbarStay=1, the Toolbar will auto-hide after 0.5 second;
If ToolbarStay=10, the Toolbar will auto-hide after 5 seconds.
EnableLogonMainMenu — Default is no. Yes/no option to enable the main
menu if you click the mouse button on the desktop prior to logon in Zero
mode.
[HorizonIsClassic=[yes, no]]—When the value is set to
HorizonIsClassic=yes, this parameter enables the VMware mode to be
displayed in the classic mode.
SysName
NOTE: DISCONTINUED. DO NOT USE.
TcpTimeOut={1 , 2}
Default is 1.
Specifies the timeout value of a TCP connection. The number of 30 seconds
for the timeout value of a TCP connection. The value must be 1 or 2 which
means the connection timeout value is from 1x30= 30 seconds to 2x30= 60
seconds.
38 Parameters for wnos INI files only