Setup Guide

Table 5. Connection Settings: wnos.ini files only (continued)
Parameter Description
Values of 3-255 are recognized only for backwards compatibility that is >2 =
60 seconds, however, these values should not be used and the value should
be set to 2.
VncPassword=<password>
[encrypt={no, yes}]
VncPassword — Specifies a string of up to 8 characters as the password
used for shadowing.
encrypt — Default is no. Yes/no option to set according to whether or not
the vncpassword you are using is encrypted.
NOTE: To use VNC Shadow, you must set MaxVNCD=1 and define a
password; The MaxVNCD default is 0 and this disables VNC. If you are
using an encrypted password, you must set encrypt to yes. For example:
VncPassword=<encoded password> encrypt=yes
If you are using a plain text password, you must set encrypt to no. For
example:
VncPassword=<plain text> encrypt=no
See also MaxVNCD in Connection Settings: wnos.ini files only to enable
VNC shadowing.
See also VNCPrompt in Connection Settings: wnos.ini files, {username}
INI, and $MAC INI Files to enable a VNC shadowing prompt to a user.
WarnUnlinkDisabled={yes, no}
Default is no.
Yes/no option to disable the pop-up warning message when a network has no
link for an ICA/ RDP session.
WINSServer=server_list
Specifies the WINS server address. The WINSserver is an IP list separated by
";" or ",", with a maximum list size of 2.
AutoSelectSingleCert={yes, no} When HTTPS is configured to verify client certificate, one window pops
up for user to select the client certificate. If only one client certificate is
available, set AutoSelectSingleCert=yes does not prompt the window and
automatically select the client certificate.
Parameters for wnos INI files only 39