Administrator Guide

Configuring the General Display Settings
To configure the general display settings.
1. From the floating bar menu, click the System Setup , and then click Display.
The Display dialog box is displayed.
Figure 109. Display—General
2. Click General tab and use the following guidelines:
a. Select best display setting on DDC monitor—If the monitor is VESA DDC2B (Display Data Channel) compatible,
selection of this option allows the zero client to automatically select the best resolution and refresh rate.
If your monitor is not DDC compatible, then Monitor does not support Plug and Play message is displayed. Click OK
to acknowledge the message, and remove it from the screen.
b. DDC table— If the monitor is VESA DDC2B (Display Data Channel) compatible, selection of this option allows you to
select the resolution and refresh rate you want from the list.
c. User defined display setting— Select this option and select the resolution and refresh rate supported by your monitor.
All combinations are allowed.
Resolutions include:
640 x 480 (not on Wyse 3020 zero client for Citrix-T00DX)
800 x 600 (not on Wyse 3020 zero client for Citrix-T00DX)
1024 x 768
1152 x 864
1280 x 720
1280 x 768 (not on Wyse 3010 zero client for Citrix-T00X)
1280 x 1024
1360 x 768 (not on Wyse 3010 zero client for Citrix (T00X)/ Wyse 3020 zero client for Citrix (T00DX) class)
1366 x 768
1368 x 768 (not on Wyse 3010 zero client for Citrix (T00X)/ Wyse 3020 zero client for Citrix (T00DX)T00X)
class)
1400 x 1050
114
Configuring Zero Client Settings