Administrator Guide

Table 22. Parameters for a xen.ini File (continued)
Parameter Description
DomainList=<List of NT domain names>
[disable={yes/no}]
A list of domain names that will appear in the Log on dialog box
as options to help users in selecting the domain to sign-on to
PNAgent/ PNLite servers. Once specified, it is saved in non-volatile
memory.
NOTE: Be sure to enclose in quotation marks if spaces are
included.
For example: DomainList=”North_America, SQA, test-domain”
disable— If the value is set to yes, the domain field in sign-on
window is disabled.
Dualhead={no, yes}
[ManualOverride={yes, no}]
[Mainscreen={1, 2}]
[Orientation={
hort, vert}]
[Align={Top, Center, Bottom}]
[MonitorAutoDetect={yes,no}]
[EnsureDpIsOn ={yes, no}]
Default is no.
Dualhead — Yes/no option to support a dual-monitor display.
CAUTION: If Dualhead is changed to yes, your zero client
will require a reboot to change the monitor display.
ManualOverride — Yes/no option to have all the parameters
only valid in factory default. It is helpful to configure the display
setting manually if both single monitor and dual monitor exist in an
environment.
Mainscreen — Sets which screen is used as the main screen.
NOTE: When using a DVI to DVI and VGA cable, the DVI
connected monitor will be the default mainscreen=1 in a dual-
monitor configuration. When using a zero client with a DP and
DVI ports, the DP is Screen 1 and DVI is Screen 2.
Orientation — Default is hort. Sets which style is used for display.
NOTE: hort means horizontal and vert means vertical.
Align — Sets how screens are aligned:
● Top means screens are top aligned in "hort" orientation.
● Center means screens are center aligned.
● Bottom means screens are bottom aligned in "hort" orientation.
MonitorAutoDetect — Determines whether or not the system will
detect how many monitors are connected. If only one monitor is
connected, Span mode will be transfered to Mirror mode.
The optional keyword EnsureDpIsOn is only used for D-class. When
EnsureDpIsOn is set to yes, D-class will halt at boot time until DP
monitor is plugged in.
FileServer=<List of IP address or DNS name>
[Username=<username>]
[Password=<password>]
[SecurityMode= {Low, Warning, Full,
Default}]
[Username-Enc={encrypted_password_string}]
[Password-Enc={encrypted_password_string}]
FileServer — Specifies the FTP or Web (http://) server IP
address or DNS name that is entered into the zero client local setup
(non-volatile memory); your zero client immediately uses this server
to access files.
Username — Specifies the username of the file server.
Password — Specifies the password of the file server.
NOTE: The target file server must support access using the
same user credentials used in the INI files.
The option SecurityMode specifies these security modes. It is only
valid when connected to https fileserver, the details of which are
shown below:
Creating and Using xen.ini Files 179