Administrator Guide

Table 22. Parameters for a xen.ini File (continued)
Parameter Description
MB to 10 MB. If the specified value is over the range, then it is set
to 5. The range of value is extended to 50.
In build 2.2_001 or after, the LPD data is spooled to a file in a ram
disk instead of a buffer. So the value of the parameter will not be
related to the spool size as before. If Lpdspool=0, the function is
disabled, otherwise the function is enabled.
ManualOverride=[no, yes]
[Components={None, display, keyboard, mouse,
timezone, network, audio, printer, language, All}]
The parameter ManualOverride allows the end users to keep their
personalized settings. The default value is No.
If the value is set to No, personalized setting is not allowed.
If the value is set to Yes, the personalized settings are saved in the
device component which can be specified using the components
option.
The parameter Components specifies the component that is
allowed as a personalized setting. Currently the options supported
are None, display, keyboard, mouse, timezone, network, audio,
printer, language, all. The default value is None.
NOTE:
● If the parameter ManualOverride is set, a warning message
is displayed when the users try to reset the device to allow
them to retain the personalized settings or revert to default
settings. The components set using the INI statements are
ignored. For example,
ManualOverride=Yes
Components="display,timezone"
This INI statement allows the user to customize display and
timezone settings, and these personalized settings are not
overridden by wnos.ini after the device restart.
MaxVNCD={
0, 1}
[VNCD_8bits={yes,no}]
[VNCD_Zlib={yes, no}]
Default is 0.Option to enable VNC shadowing. Default value is 0
means VNC shadowing is disabled. Set to 1 to enable shadowing.
NOTE: Only one VNC client session is allowed and a password
is required.
See also VNCPrompt to enable a VNC shadowing prompt to a user.
See also VncPassword to specify a string of up to 8 characters as
the password used for shadowing.
OneSignServer=onesign_server
[DisableBeep={yes,no}]
[KioskMode=yes,
no}]
[TapToLock={0,1,2}]
[EnableWindowAuthentication={yes,no}]
[AutoAccess={VMW,XD,XA,LOCAL}]
[NetBIOSDomainName={yes,
no}]
[SuspendAction={0, 1}]
[DisableHotKey={yes,no}]
Loglevel=0/1/2/3
[DisablePromptToEnroll={yes,no}]
A list of host names or IP addresses with optional TCP port
number or URLs of Imprivata OneSign servers. It should use https
protocol. If OneSignServer="" is defined, then only imprivata virtual
channel can work.If DisableBeep is set to yes, then Rfideas reader
can be set to mute when a card is tapped. Default is no.
If KisokMode is set to yes, then different OneSign user can unlock
the client desktop. Default is no.
Optional keyword TaptoLock is only active when KioskMode=yes. If
TapToLock=0, then tap a card to lock terminal is disabled. If
TapToLock=1(Tap to lock), then use the proximity card to lock the
terminal. If TapToLock=2(Tap over), then lock the terminal and log
in as a different user. Default is 2.
If EnableWindowAuthentication is set to yes and OneSign signon
fails, then continue to sign-on with windows credential to pre-define
broker. Default is yes.
Creating and Using xen.ini Files 187