Administrator Guide

Table 23. ICA connect: options (continued)
Option Description
HttpBrowsing={no, yes}
Default is no.
Yes/no option to select an http browsing protocol. Use
HttpBrowsing=no for User Datagram Protocol (UDP).
NOTE:
This option is used to override the default method of
browsing established in the ICABrowsing parameter.
Icon={default, bitmap file}
Specifies an icon to appear on the thin client desktop for a
connection. Use Icon=default to display a system default icon
for a connection.
To use an icon other than the default icon, enter the name
with extension of the bitmap file; ensure that the file is
located in the FTP server wnos\bitmap directory. If Icon=
is not specified and the icon is not specified by a PNAgent/
PNLite server, no icon is displayed for a connection.
KeepAlive={0 to 127}
Specifies the number of minutes to keep a session connected
after the session is inactive. During this period, one dummy
packet will be sent to the server if network traffic is lost.
Default is 10.
LocalCopy={no, yes}
Default is no.
Yes/no option to save the connection to the local NVRAM.
The connection description of the Description option is used
as the index key into the local connection table. If a match is
found, then the entry is updated. Otherwise, a new entry is
created.
Maximum total of local entries is 16.
Logon_mode={local-user, smartcard, user-specified} Default is local-user.
Specifies how users authenticate to the selected application
set or ICA connection.
Lowband={no, yes}
Default is no.
Yes/no option to enable optimization for low speed
connections such as reducing audio quality and/or decreasing
protocol-specific cache size.
Mapdisks={no, yes}
Default is no.
Yes/no option to auto-connect and map any connected USB
flash drive upon connection start.
Mapdisksunderz
NOTE: : DISCONTINUED. DO NOT USE
.
[NO_FontSmoothing={no, yes}]
Default is no—font smoothing is enabled by default.
Yes/no option to disable font smoothing. If set to yes, the
font smoothing is disabled.
NoReducer={no, yes}
Default is no.
Yes/no option to turn off compression. Default is no, which
enables compression. To turn off compression, enter yes.
220 Creating and Using xen.ini Files