Release Notes

● You cannot use the headset key to pick/end calls. This issue will be resolved in next release.
● Dell does not recommend video call in 4K display resolution on all platforms due to low performance.
● JVDI version in ThinOS 8.6 must be compatible with JVDI agent and Jabber version. For example, JVDI version 12.1 in ThinOS
8.6 supports JVDI agent and Jabber version 12.1.
● Audio output is poor when you enable the JVDI audio during the full screen video call on Wyse 5060 and 3040 thin clients.
This is due to hardware performance limitation. Wyse 5070 thin client supports full screen video call with good audio output.
NOTE: JVDI package is introduced from ThinOS version 8.6 to support Cisco Jabber. You must download the JVDI package
from the Driver and Downloads tab on your respective thin clients page at www.dell.com/support. When you download
the JVDI.zip package, the README WITH EULA.txt and JVDI.i386.pkg files are unzipped. Ensure that you open the readme
file and read the EULA agreement before you deploy the package to the ThinOS client.
For more information about Cisco Jabber Softphone for VDI installation procedure, see the Dell Wyse ThinOS Version 8.6
Administrator's Guide at www.dell.com/support.
NOTE:
● For more details about accessories for camera, headsets, speakers, see www.cisco.com/c/en/us/products/unified-
communications/uc_endpoints_accessories.html.
● For more information about the Cisco Jabber issues, see the Release notes for Cisco Jabber Softphone for VDI at
www.cisco.com.
● For information about troubleshooting your Cisco Jabber, see the Deployment and Installation Guide for Cisco Jabber
Softphone for VDI at www.cisco.com.
Table 128. Known issues
Issue number Description Workaround
TIR97286 JVDI audio volume slider does not change
the audio volume in Wyse 3040 thin client.
This issue is due to Cisco Jabber limitation.
For more information about the Cisco Jabber
issues, see the Release Notes for Cisco
Jabber Softphone for VDI—Release 12.1
document at www.cisco.com.
Adjust audio volume by using either
the ThinOS volume bar, session sound
volume, or headset button.
TIR97605/TIR98498 Self-camera or remote video does not work,
or a black screen is displayed when you play a
video. For more information about the Cisco
Jabber issues, see the Release Notes for
Cisco Jabber Softphone for VDI—Release 12.1
document at www.cisco.com.
Sign out of the session or reboot the
ThinOS client and register the JVDI
again.
TIR97653 ICA session cannot be launched and
WdReceiv: trap 14 error occurs when you
enable the ICA session reliability with multiport
in JVDI environment.
Enable ICA session reliability
without enabling multiport in JVDI
environment.
TIR97523 Answer/End/Hold options in headset do not
work during the JVDI call.
You can Answer/End/Hold the call by
using the Jabber application in the
VDI session.
TIR98792 DP audio does not work in JVDI. When you
switch the DP audio in the JVDI device
selector, the JVDI may re-register again and a
redundant DP audio is listed in device selector.
JVDI VXC process should not restart when
you hotplug or turn off/on the monitor when
using the DP audio in JVDI.
Sign out of the ICA session or reboot
the ThinOS client. If you require DP
audio, Dell recommends that you first
set the DP audio in the ThinOS client
and then launch the ICA session.
Update RTME package to 2.5
RTME package—RTME.i386.pkg—is updated to version 2.5.49272. For information about installation and compatibility, see the
Citrix RTOP version 2.5 documentation at www.citrix.com/support.
ThinOS 8.6_013
189