Release Notes

Table 92. INI parameters
INI parameters Description
MACPASSConfigure={yes, no, Integrated} The parameter allows the thin client to enable or disable the MAC Address Pass
Through function, or use the integrated NIC.
MaxSleepPeriod={0-255} This parameter specifies the maximum time period the thin client is allowed to
be in sleep mode. The thin client reboots after resuming from sleep mode. If the
value is set to 0, the thin client resumes from sleep without rebooting.
CloseLidCharge={No, ShutDown,
OffDisplay}
The parameter allows you to set the behavior of thin client when you close the lid
with the AC adapter connected.
CloseLidDisCharge={No, ShutDown,
OffDisplay}
The parameter allows you to set the behavior of thin client when you close the lid
with the device running on battery.
BatteryAutoPowerOff={3-20} The parameter shuts down the thin client when the battery capacity is lower than
a set value.
Known issues
Table 93. Known issues
ID Description Workaround
THINOS-1266 The Wakeup-On-Lan functionality stops working when you
attempt to resume the thin client from the S3 and S5 power
states using WD19 docking station.
Use Wakeup-On-Lan
functionality from the
integrated Ethernet port.
THINOS-1447 DisplayPort audio does not work with HDMI or USB Type-C
port.
There is no workaround in this
release.
THINOS-1469 DisplayPort audio does not work when using USB Type-C
port, DisplayPort, and HDMI port over Dell WD19 docking
station.
There is no workaround in this
release.
THINOS-1479 Multi-touch input fails to work properly in an RDP session
when an external display is connected.
Use multi-touch in RDP
without the external display or
with only one external display
connected.
THINOSH-148
5
After restoring the thin client to factory restore settings,
the Bluetooth connection may fail when you connect to a
Bluetooth device the first time. However, the thin client
connects to the Bluetooth device from second instance
onwards.
There is no workaround in this
release.
THINOS-1488 Audio does not work from stereo speaker output jack on
WD19 docking station when you connect an analog audio
device.
Use the integrated audio
output jack.
THINOS-1651 The U2718Q display does not turn on after hot plugging to
the integrated HDMI port.
Reboot the thin client after
hot plugging the display.
THINOS-1656 Wyse Management Suite settings are not automatically
fetched from the DHCP/DNS options when you use the
WD19 dock.
Use the integrated Ethernet
port.
144 ThinOS 8.6_108