Release Notes

Table Of Contents
Table 10. INI parameters
INI parameters Description
DEVICE_SECURITY=allow_list/
block_list
Backward compatibility is added to support the previous parameter values
Fixed issues
Table 11. Fixed issues
Issue ID Description
THINOS-2630 ThinOS rolls back after upgradeCIPS-21417.
THINOS-2591 The thin client stops responding when you connect to a Horizon session, with Nuance PowerMic II-ns
plugged in before booting the ThinOSCIPS-19952.
THINOS-2562 An error occurs on Wyse 5060 Thin Client while using the webcam on Cisco Webex session
CIPS-18846.
THINOS-2636 The default playback device does not change automatically when it is plugged inCIPS-21677.
THINOS-2423-2/2588 Keyboard issue observed on a USB keyboard when multiple keys are pressed together and released.
THINOS-2601 The external numeric keypad does not work properly in a Blast 7.12 sessionCIPS-19528.
THINOS-2555 Repeated entries of on-screen keyboard characters occur on multi-touch monitorsWTOS -
ELO2002L.
THINOS-2623 USB headsets do not get detected automatically.
THINOS-2648 The Wyse Management policy settings configured with BIOS version 1.8.0 update affects the devices
that run BIOS version 1.10.2CIPS-22487.
THINOS-2644 In the ThinOS 8.6x and 2.6x firmware, the Combined=yes INI parameter value does not work
CIPS-22336.
Known issues
Table 12. Known issues
Issue ID Description Workaround
THINOXSUS-971 On Wyse 5470 All-in-One with 32 GB SanDisk
eMMC, ThinOS 8.6_703 stops responding if the
system goes to sleep.
Upgrade to ThinOS 9.x
THINOXSUS-977 On thin clients with ThinOS 8.6_703, network
I/O error occurs when tapped on the Imprivata
proximity card reader after the session is
launched.
Upgrade to ThinOS 9.x
THINOXSUS-1107 Thin client reverts to Group1, post conversion
of the image from ThinOS 8.6_803 to ThinOS
9.1.1155.
Upgrade to ThinOS 9.x
THINOXSUS-1121 On Wyse 5470 Thin Client, a blank screen is
displayed when you upgrade the ThinOS 8.6
firmware.
Upgrade to ThinOS 9.x
THINOXSUS-831 On an All-in-One thin client with ThinOS 8.6_606,
if an external monitor is connected, the Citrix
Session goes to window mode when the external
monitor is removed.
Upgrade to ThinOS 9.x
30 ThinOS 8.6_807