Release Notes

Table 41. Tested peripheral devices for ThinOS 8.6_511 (continued)
Product
Category
Peripherals Wyse
3040
Wyse
5070
Wyse 5470
All-in-One
Wyse
5470
Wyse
5060,
5010, and
7010
Printer Dell Color Multifunction Printer - E525w Tested Not
applicable
Not
applicable
Not
applicable
Not
applicable
Dell Color Printer- C2660dn Tested Tested Not
applicable
Not
applicable
Not
applicable
Dell Multifunction Printer - E515dn Tested Not
applicable
Not
applicable
Not
applicable
Not
applicable
INI parameters
The following table provides the list of INI parameters:
NOTE: Every INI parameter is associated with a parent INI parameter. Use these INI parameters along with the
corresponding parent INI parameters. For more information about the newly added INI parameters, see the Dell Wyse
ThinOS 8.6 INI Reference Guide at www.dell.com/support.
Table 42. INI parameters
INI parameters Description
SessionConfig=RDP
[desktopmode={fullscreen, window}]
This parameter is only available for the RDP desktops that are published in the
VMware Broker agent. The default is fullscreen mode for an RDP desktop.
SignOn={yes, no, NTLM}
[EnableMessage={yes, no}]
EnableMessage addresses the vulnerability issue- PSRC-12979. It is used to display
the security warning message on the signon window based on the FileServer path.
The default is yes. A warning message is displayed on top of the signon window when
FTP/HTTP is configured on the FileServer path otherwise no message is displayed.
Device=Wireless
[WlanFnKeyDisable={0,1}]
The default value is 0. This parameter is used to disable the Fn+PrtScr key in a
wireless connection. It is only available for Wyse 5470 Mobile Thin Client.
[PowerFnKeyDisable={0,1}] The default value is 0. This parameter is used to disable the Fn+Insert key. It is only
available for Wyse 5470 Mobile Thin Client.
[ClassicModeAppsEnable={0,1}] The default value is 0. This parameter is used to display the Published applications
which has the Keyword Mandatory property set. It is only available for the Citrix
Broker agent in classic mode.
Device=Wireless
[DeleteWirelessProfile={0,1}]
The default value is 0. This parameter is used to delete the specified
wireless profile from the NVRAM. For example- device=wireless SSID=ThinOS
DeleteWirelessProfile=yes will delete the ThinOS SSID from the NVRAM if configured.
ConnectionBroker={default, VMware,
Microsoft, Quest, AWS}
[EnableAWSREGCode={yes,no}]
This option enables or disables the ability to change the registration code for
connection to AWS. If the value is set to yes, you can modify the registration code for
connecting to AWS by the logon window. If set to no, the registration code field will
be disabled and if this INI is not defined then the broker server or registration code
can be entered manually from the GUI.
Fixed issues
Table 43. Fixed issues
Issue ID Description
THINOS-2505 Fixed the issue where the Blast main screen application
switches display after reconnection.
ThinOS 8.6_511 71