Administrator Guide

Parameter Description
NOTE: These settings are saved into NVRAM if EnableLocal is
set to yes in the xen.ini le.
disabledKeys=PrtScn;SysRq—You can use this parameter to disable
keys in the keyboard. Use semicolon (;) to separate each key. Currently,
only Prtscn and SysRq keys are supported.
Device=UsbTrace
vid_pid={device vid/pin hex format}
[max_len=500]
Specify the ThinOS Lite to trace USB device data to ftp or USB disk.
For "vid_pid", that is, device Vendor ID and Product ID hex value, the VID
is high 16 bit while Product ID is low 16 bit. This allows to trace maximum
of 8 devices at one time.
For "max_len", set a max len for capturing each USB transfer data. The
default value is 128.
After the user sets this, the user needs set option in Trouble shooting to
start tracing the USB device data.
Device=Rdeas
[DisableBeep={yes,no}]
[DisableKeyStroke={yes,no}]
[SetCardType={yes,no} Conguration1={*}
Conguration2={*}]
[DisableInitialization={yes,no}]
[DisableLed={yes,no}]
Device=Rdeas — Species the local Rdeas readers.
DisableBeep — Default is yes. Option disables the beep sound when the
card is read.
DisableKeyStroke — Default is yes. Option disables the keyboard
movements and key strokes.
SetCardType — Default is no. Used only for pcProx Plug readers.
If set to yes, then the Conguration #1 initializes to HID Prox 608x
compatibility and Conguration #2 initializes to RDR-758x Equivalent.
If set to no, then the card type remains unchanged.
DisableInitialization — Default is no. Option disables congurations to the
card reader.
Device=mtouch
[mult_touch={yes, no}]
[mult_jitter={5-50}]
This parameter species the ThinOS multi-touch Monitor setting.
For mult-touch, if the value is set as yes, multi-touch is supported. If the
values is set as no, multi touch is not supported. The default value is yes.
For mult-jitter, choose larger value if you prefer single click. Choose
smaller value to have better user experience. The default value is 30.
DHCPOptionsRemap={yes, no}
[DisableOption12={yes, no}]
[FileServer={128-254}]
[RootPath={128-254}]
[FtpUserName={128-254}]
[FtpPassWord={128-254}]
[RapportServer={128-254}]
[RapportPort={128-254}]
[WDMServer={128-254}]
Default is no.
DHCPOptionsRemap — Species whether or not the following options
can be set.
The value for each option must be from 128 to 254. Values for the options
must be dierent for each option. These options are used to congure
DHCP server tags for zero client booting.
The option DisableOption12 sets if the option tag 12 in DHCP is accepted
or not. As default, DHCP option 12 sets the hostname and domain name
of the terminal. For example, the information of option 12 is terminal
name.wyse.com, the terminal name will be set as terminalname and the
domain name will be set as wyse.com.
If you set dierent value for DisableOption12 from the value in NVRAM,
the system will automatically reboot to make the value valid. (CIR36891)
Creating and Using xen.ini Files 187