Administrator Guide

Parameter Description
StoreFront — Default is no. Yes/no option to support Citrix StoreFront
Authentication. The value will be saved into NVRAM.
HttpUserAgent—The option will replace the default “CitrixReceiver
WTOS/1.0” during Netscaler login. If you are using “WTOS/1.0” as
Netscaler Session Policy, set this INI parameter to retain your Netscaler
policy conguration.
CAGSendDomain—This option sends domain as domain\user to external
network Netscaler to support Netscaler and DUO passcode
authentication. The default value is no.
IgnoreDefaultGateway—This option ignores default gateway of the
current selected store during Netscaler login. Always use pnliteserver to
continue. The value Yes ignores the default gateway. No is the default
value. When the value is set to no Netscaler server is used as default
gateway to reset login again.
CAGUserAsUPN—This parameter enables you to send user details to
server in the format similar to an email address—username@fqdn.
Certain third party authentication for Netscaler requires this format. For
example, Okta authentication.
CAGExternal—This value allows CAG login with external network mode
directly without verifying beacons. This reduces the login time.
DisableSFInit—This value disables storefront initialization process during
the system bootup. Storefront initialization can be disabled using this
parameter as it is not required during login.
FastDisconnect={yes,
no, Signo}
[CtrlKey={yes, no}] [AltKey={yes, no}]
[PowerButton=signo]
Default value is set to yes.
If the value is set to yes, pressing the F12 (default) key or the key dened
in FastDiconnectKey= statement will close the active window of the
session. If the active window is a seamless window, the action will only
close the window. If the window is not a seamless window, then the
session will be disconnected. If the option CtrlKey and/or AltKey is set to
yes, the function key should be combined with Ctrl key and/or Alt key. If
the value is set to Signo, pressing the F12 (default) or the key dened in
FastDisconnectKey= statement will disconnect all sessions and return to
the signon window. If PowerButton is set to signo, pressing the power
button of the unit after you sign on will disconnect all sessions and return
to the logon window. Otherwise, the unit will shut down normally.
FastDisconnectKey={F1, F2, F3, F4, F5, F6, F7, F8, F9, F10,
F11, F12, Pause/Break}
Species the disconnect key that will close the active window from the
session.
Printer={COM1, COM2, LPT1, LPT2}
[Name=<name>]
[PrinterID=window_driver]
[Class=classname]
[Enabled={no, yes}]
[EnableLPD={no, yes}]
Default is COM1.
Printer — Species the local printer to congure.
Name — Species the name of the printer. This option must be used.
PrinterID — If not specied, the default Generic/Text Only is used.
Class — Used in ThinPrint print for TPAutoconnect; the ThinPrint
technology of mapping the printer from the client side. It can group
printers to use the same template on the ThinPrint server side. The
strings PCL5, PS, and TXT are pre-dened classes. Class can be a string
with 7 characters.
Enabled — Default is yes. Yes/no option to enable the printer.
Creating and Using xen.ini Files 207