Administrator Guide

Option Description
The connection description of the Description option is used as the
index key into the local connection table. If a match is found, then
the entry is updated. Otherwise, a new entry is created.
Maximum total of local entries is 16.
Logon_mode={local-user, smartcard, user-specied} Default is local-user.
Species how users authenticate to the selected application set or
ICA connection.
Lowband={no, yes}
Default is no.
Yes/no option to enable optimization for low speed connections
such as reducing audio quality and/or decreasing protocol-specic
cache size.
Mapdisks={no, yes}
Default is no.
Yes/no option to auto-connect and map any connected USB ash
drive upon connection start.
Mapdisksunderz
IMPORTANT: : DISCONTINUED. DO NOT USE
.
[NO_FontSmoothing={no, yes}]
Default is no—font smoothing is enabled by default.
Yes/no option to disable font smoothing. If set to yes, the font
smoothing is disabled.
NoReducer={no, yes}
Default is no.
Yes/no option to turn o compression. Default is no, which enables
compression. To turn o compression, enter yes.
Used here is an option of the Connect statement. It sets the value
of NoReducer only for this specied connection.
NOTE:
By default the ICA protocol compresses the data to minimize
the amount of data that needs to traverse the network. This
compression can be as much as 50 percent for text-based
applications such as Microsoft Word and 40 percent less for
graphics applications than the data streams that are not
compressed.
OnScreen={1-6} In multi monitor span mode, this value indicates which screen
session must display fullscreen.
Password={password, $SYS_VAR}
Password to log-in to the application server. Either a conventional
login password or a variable can be used. Maximum of 19
characters are allowed.
The value of password is a conventional login password.
The value of $SYS_VAR is a system variable found in Table: System
variables.
Creating and Using xen.ini Files 233