Administrator Guide

When EAP-MSCHAPV2 is selected as EAP type in the Authentication Properties dialog box for PEAP or FAST
authentication, a check box to enable Single Sign-On feature is available for selection.
3 Click OK to save the settings.
Conguring the WLAN settings
1 From the oating bar menu, click System Setup, and then click Network Setup.
The Network Setup dialog box is displayed.
2 Click the WLAN tab, and use the following guidelines:
Figure 10. WLAN settings
a Add— Use this option to add and congure a new SSID connection.
You can congure the SSID connection from the available security type options.
b After you congure the SSID connection, the added SSID connection is listed on the page of the WLAN tab.
• Remove — Use this option, if you want to remove a SSID connection by selecting the SSID connection from the list.
• Properties — Use this option to view and congure the authentication properties of a SSID connection that is displayed in
the list. From the ThinOS Lite 2.3 release, a new EAP type named EAP-Fast is added in the EAP type drop-down list. During
the initial connection, when there is a request for a Tunnel PAC from the authenticator, the PAC is used to complete the
authentication. Therefore, the rst time connection always fails and the following connections succeed.
Conguring
the connectivity 35