Release Notes

Table Of Contents
Table 133. Smart card information from ThinOS event log (continued)
Smart Card information
from ThinOS event log
Driver Provider (CSP) Card type
Etoken Java(aladdin) (black
USB key)
SafeNet Authentication
Client 8.2.133
eToken Base Cryptographic
Provider
SafeNet eToken 5110
A.E.T. Europe B.V. SafeSign-Identity-
Client-3.0.76
SafeSign Standard
Cryptographic Service
Provider
G&D STAb dRCOS 3.0 T =0/1
0V300
A.E.T. Europe B.V. SafeSign-Identity-
Client-3.0.76
SafeSign Standard
Cryptographic Service
Provider
Giesecke and Devrient StarCos
3.2
PIV (Yubico) (black USB key) YubiKey PIV Manager Microsoft Base Smart Card
Crypto Provider
YubiKey 4.3.3
cv cryptovision gmbh (c)
v1.0ns
cv_act_scinterface_6.1.6 cv act sc/interface CSP G&D STARCOS 3.2
Known issues
This section describes the known issues in this release.
Table 134. Known issues
Issue
number
Description Workaround
TIR98812 You cannot click OK to change the resolution when you set
the Left turn 90 degrees screen as a main display.
There is no workaround in this release.
TIR98790 Background is filled with color when you start an application
and move the application while previewing the image with
two cameras.
There is no workaround in this release.
TIR98788 The USB drive cannot be redirected into the Blast session
when you disconnect the USB drive from the device and then
connect with the same USB port again.
Use the USB port that is not used. If all ports
were used before, reboot the device to remove
the USB device information from the device.
TIR98781 Audio output is poor when you enable the JVDI audio during
the full screen video call on Wyse 5060 and 3040 thin clients.
This is due to hardware performance limitation. Wyse 5070
thin client supports full screen video call with good audio
output.
Do not use the JVDI video call with window
mode on Wyse 5060 and 3040 thin clients.
TIR98780 Blast Windows 7 session stops working for about 4-5
seconds.
There is no workaround in this release.
TIR98768 Image upgrade using Wyse Management Suite deletes the
existing packages while the existing Wyse Management Suite
App policy does not install the packages again.
Create a Wyse Management Suite App policy to
install the package after upgrading.
TIR98755 Wyse Management Suite BIOS policy settings, and ini BIOS
settings may be incompatible that results in a device reboot
loop.
Disable either the DellCmos INI or the BIOS
setting from Wyse Management Suite.
TIR98727 JVDI troubleshooting logs show incorrect information. There is no workaround in this release.
TIR98714 Pulse audio is missing and you cannot open any device file. Reboot the thin client.
TIR98605 If the text copy and paste functionality between the local and
Blast sessions requires a session switch, then the last copied
content is placed in the session application successfully.
Switch the session between local and Blast
session.
TIR98580 You must create a new INI parameter to disable the Vertical
Synchronization.
There is no workaround in this release.
190 ThinOS 8.6_013