Administrator Guide
NOTE:
ICA sessions always have automatic connection to attached smart card readers. When using the Disks check box for automatic
connection to connected USB sticks, use the following guidelines:
• More than one disk can be used at the same time, however, the maximum number of USB sticks including dierent subareas
is 12.
• Be sure to save all data and sign o from the session mapping the USB stick before removing the USB stick.
NOTE: USB devices redirection — By default, audio, video and printer devices will not use HDX USB for redirection. You
can make selections for USB device redirection on the Session tab of the Global Connection Settings dialog box.
3 Click the ICA tab to select the check boxes you want for the options that are available to all ICA sessions. Select the audio quality
optimized for your connection.
Map to — When a drive is entered, maps a disk under the drive.
4 Click the RDP and use the following guidelines:
• Enable or disable Network Level Authentication (NLA)— The NLA authentication method veries users before they are allowed to
connect with a full Remote Desktop connection.
• Enable or disable ForceSpan— This dual-monitor feature allows you to span the session horizontally across two monitors, thus two
monitors acting as one large monitor.
• Enable or disable Terminal Service multimedia Redirection (TSMM).
• Enable or disable Record from Local (recording from local microphone).
• Enable or disable RemoteFX.
• Select the USB Redirection Type (TCX USB or RDP USB)— TCX USB is the default. To use RDP USB, you must use a RemoteFX
session for Windows 7/Windows2008R2 session. However, RDP USB is not supported using a standard Windows 7/
Windows2008R2 session. For Windows 8 session and above, RDP USB is supported.
5 In PCoIP enabled clients, an additional tab named PCoIP is available. Select the USB device redirection type from the drop-down list.
The available values are PCoIP USB and TCX USB.
20
Global Connection Settings