Administrator Guide
is used to make the connection. These entries can be supplied through DHCP, if DHCP is used. DNS and WINS provide
essentially the same function, name resolution. If both DNS and WINS are available, the thin client attempts to resolve the name
using DNS rst and then WINS.
You can enter two WINS Server addresses (primary and secondary), separated by a semicolon, comma, or space.
f Enter the digit multiplier of 30 seconds in the TCP Timeout box to set the time-out value of a TCP connection. The value must
be 1 or 2 which means the connection time-out value is from 1x30= 30 seconds to 2x30= 60 seconds. If the data for connecting
to the server is not acknowledged and the connection is time out, setting the time-out period retransmits the sent data and
again tries to connect to the server till the connection is established.
3 Click OK to save the settings.
Conguring the DHCP Options Settings
To congure the options settings:
1 From the desktop menu, click System Setup, and then click Network Setup.
The Network Setup dialog box is displayed.
2 Click the Options tab, and use the following guidelines:
a DHCP Option IDs — Enter the supported DHCP options. Each value can only be used once and must be between 128 and 254.
For information about DHCP options, see DHCP Options.
b Interpret DHCP Vendor-Specic Info — Select this check box for automatic interpretation of the vendor information.
c DHCP Vendor ID — Shows the DHCP Vendor ID when the dynamically allocated over DHCP/BOOTP option is selected.
Conguring
the Connectivity 23