Administrator Guide

In the Disclaimer window, if you click Accept, you are directed to the user login window. If you click Cancel, the user login window

displays the message broker initialization failed.

• Changes applicable to Wyse 3030 LT thin client with PCoIP, Wyse 5010 thin client with PCoIP (D10DP), Wyse 5040 AIO thin

client with PCoIP (5213), and Wyse 5060 thin client with PCoIP.

• PCoIP session NUM/CAP keyboard status synchronizes with session instead of thin client

This is applicable for session startup only. The PCoIP session keyboard NUM/ CAP status synchronizes from remote session to

client, whereas RDP/ ICA synchronize status from local to remote session.

For example,

1 Set keyboard NUM=off in current PCoIP session.

2 Disconnect the session.

3 Set client keyboard NUM=on.

4 Reconnect to the PCoIP session.

5 The keyboard NUM status in both session and client is updated to NUM=off.

• RDS desktop through PCoIP

You can view and connect to the Remote Desktop Service (RDS) desktop through the PCoIP protocol in the broker. In VMware

Horizon View 6.0 and later versions, the RDS desktop has RDP and PCoIP connections based on server congurations.

In Wyse 5010 thin client with PCoIP (D10DP) and Wyse 5040 AIO thin client with PCoIP (5213) running ThinOS 8.0, you can only

view the RDP connection for the RDS desktop. In ThinOS 8.2, the PCoIP connection is available for both Wyse 5010 thin client with

PCoIP (D10DP) and Wyse 5040 AIO thin client with PCoIP (5213) running ThinOS 8.2 and in ThinOS 8.3, the PCoIP connection is

available for Wyse 3030 LT thin client with PCoIP. From 8.3.1, PCoIP connection is available for Wyse 5060 thin client with PCoIP.

NOTE

The RDS Application over PCoIP is not supported in this version.

The RDS desktop protocol switch message dialog box is provided in this release. A typical user scenario is as follows:

1 Connect to the RDS desktop through protocol. For example, RDP.

2 Disconnect from the desktop.

3 Connect to the same RDS desktop through another protocol. For example, PCoIP.

The message dialog box is displayed, allowing you with an option to continue.

The options available are:

• Cancel— You can end the PCoIP connection, and connect to the desktop in RDP again.

• Log Out and Reconnect— You can connect to the desktop through PCoIP, and the earlier session in RDP is logged out.

Conguring the Connectivity