Administrator Guide

File Servers/Path, Username and Password — Enter the IP address or host name of the le server that provides the system
software and update images. The address can be supplied through DHCP, if DHCP is used.
a File Servers/Path — Allows maximum of 128 characters. The data species part of the path to be used when the server is
accessed. Multiple le servers/paths may be named, as long as all data ts in the length limitation.
b Username — Enter the username to log in to the le server. Use maximum of 15 characters.
c Password — Enter the password to log in to the le server. Use maximum of 15 characters.
3 Click OK to save the settings.
Conguring the WDA Settings
Use this tab to congure the WDM and CCM settings.
To congure the WDA settings, do the following:
1 From the desktop menu, click System Setup, and then click Central Conguration.
The Central Conguration dialog box is displayed.
2 Click WDA, and use the following guidelines.
WDM is selected by default. WDA service automatically runs after the client boot up.
Conguring
the Connectivity 59