Administrator Guide
• Conguring the Dual Head Settings
Conguring the General Display Settings
To congure the general display settings:
1 From the desktop menu, click System Setup, and then click Display.
The Display dialog box is displayed.
2 Click the General tab, and use the following guidelines:
a Select best display setting on DDC monitor—If the monitor is VESA DDC2B (Display Data Channel) compatible, selection of
this option allows the thin client to automatically select the best resolution and refresh rate.
If your monitor is not DDC compatible, then Monitor does not support Plug and Play message is displayed. Click OK to
acknowledge the message and remove it from the screen.
b DDC table— If the monitor is VESA DDC2B (Display Data Channel) compatible, selection of this option allows you to select the
resolution and refresh rate you want from the list.
c User dened display setting— Select this option and select the resolution and refresh rate supported by your monitor. All
combinations are allowed.
Resolutions include:
640 x 480 (not on T10D)
800 x 600 (not on T10D)
1024 x 768
1152 x 864
70
Conguring Thin Client Settings