Reference Guide

This is a vendor-specic information. If ParseVendorInfo is set to no
and the DHCPVendorID is also used with this parameter, you must
set ParseVendorInfo=yes and then reboot the thin client twice.
Maximum of 26 characters are allowed in a string.
DHCPVendorID=vendor
[ParseVendorInfo={no, yes}]
DHCPVendorID — Species the VendorID used for DHCP.
ParseVendorInfo — Default is yes. Yes/no option to specify
whether or not ThinOS will interpret DHCP option 43.
This is a vendor-specic information. If ParseVendorInfo is set to no
and the DHCPVendorID is also used with this parameter, you must
set ParseVendorInfo=yes and then reboot the thin client twice.
Maximum of 26 characters are allowed in a string.
DisableDomain={no, yes}
Default is no.
Yes/no option to disable the drop-down domain list in the
PNAgent/PNLite Sign-on dialog box.
DNSIPVersion={ipv4, ipv6}
[DNSServer=server_list]
[DNSDomain=dns_domain_url]
Species the DNS server and domain. Default IP version is ipv4.
The DNSServer is an IP list separated by ; or ,. The maximum size
of this list is 16. For example: 10.200.5.53;192.168.100.1;192.168.200.8
IMPORTANT: There is no space after the ;.
DNSTTL={0-3600}
Species the Time to Live (TTL) of DNS name caching; the default
is from DNS server settings.
NOTE:
If DNSTTL=0, the DNS hostname in a connection always
queries the DNS server to get the IP.
DomainList=List of NT domain names
A list of domain names that will appear in the thin client Sign-on
dialog box as options to help users in selecting the domain to sign-
on to PNAgent/PNLite servers. Once specied, it is saved in non-
volatile memory.
NOTE:
Be sure to enclose in quotation marks if spaces are included.
For example: DomainList=North_America, SQA, test-domain
Dualhead={no, yes}
[ManualOverride={no, yes}]
[Mainscreen={1, 2}]
[Orientation={hort, vert}]
[Align={Top|Left, Center, Bottom|Right}]
[Taskbar={wholescreen, mainscreen}]
[MonitorAutoDetect={yes,no}]
[Swap={no, yes}]
Default is no.
Dualhead — Yes/no option to support a dual-monitor display.
Default no sets monitors to mirror mode; yes sets monitors to span
mode.
ManualOverride — Default is no. Yes/no option to allow the local
client to override display dualhead settings received from central
conguration.
If reset to factory defaults, it will once again take server settings for
dualhead. This is helpful for scenarios where you have a mixture of
dual head and single head deployments.
Parameters for WNOS INI Files Only 23