Reference Guide

Idle— The option Idle species the idle minutes. After the
scheduled reboot time is reached, the unit reboots, if there is no
session or the terminal is idle for specied idle minutes. If the
session is still active, the reboot is delayed till the idle time is
reached or log o the sessions.
For example,
If you set Reboot=yes time=20:30, the unit reboots on local time
20:30. If you set Reboot=yes time=20:30-4:30, the unit reboots on
random time through 20:30 to 4:30.
If you set Reboot=yes time=23:00 Wday=Friday,Monday, the unit
reboots on local time 23:00 of Friday and Monday.
If you set Reboot=yes time=1:00 Idle=10, the unit reboots on 1:00, if
there are no sessions. If there is any active session, the reboot
happens only if the unit is idle for 10 minutes or the system logs out
from the session.
Since 8.3_012 or later, scheduling a shutdown at a given time is
supported. The options are same as schedule a reboot as above.
For example, Set Shutdown=yes time=20:30, the unit shuts down
at local time 20:30.
RegisterWINS=yes Forces the thin client to register itself with a Microsoft WINS
server.
SelectServerList={PNA, VDI}
[Default=default_desc]
list of servers {Server1; Server2; ...ServerN}
Allows users to select one PNA or VDI server during logon. For
server use the format:
description = <server’s description> host = <server’s
url> [ <options>]
NOTE: There must be “description” and “host” key words
on each server.
For PNA server options, use the options of the PnliteServer
parameter in Table 7 Connection Settings: wnos.ini les, {username}
INI, and $MAC INI Files.
PNA example:
SelectServerList=PNA; Default=test3;
description = test1; host =
192.168.0.10; autoconnectlist
=*; reconnectfrombutton=0; description =
test2; host = HostName2.wyse.com; TimeOut=200;
descriprion = test3 host =
https://
server3.wyse.com
For a VDI server: If you want to use a VDI broker, specify
ConnectionBroker in wnos.ini. Otherwise the VDI broker’s type is
default.
VDI example:
ConnectionBroker=VDM
SelectServerList=VDI; Default=test5
description = test4; host = 192.168.0.11;
description = test5; host = host2.wyse.com
The Default option following "SelectServerList={PNA, VDI}" can
specify the default server. The value is one of server description
dened after that. After one selects another server and sign o,
32
Parameters for WNOS INI Files Only